DC-ME-Y413-C-B Equivalent & Substitute Parts

Part Overview

The DC-ME-Y413-C-B is a Digi Connect ME® Embedded Module featuring an ARM926EJ-S processor running at 75MHz with 8MB RAM and 16MB Flash storage. This module is designed for embedded applications requiring network connectivity via RJ45 connector. The part is currently discontinued at DiGi Electronics, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

DC-ME-Y413-C-B

DigiIn Stock: 1151DC-ME-Y413-C-B Datasheet

Current PartRFQ

DC-ME-Y402-S-UPW

DigiIn Stock: 1005DC-ME-Y402-S-UPW Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DC-ME-Y413-C-B is determined by the following critical parameters:

• Core Processor: ARM926EJ-S, NS9210 (must match)
• Processor Speed: 75MHz (must match)
• RAM Size: 8MB (must match)
• Connector Type: RJ45 (must match)
• Module/Board Type: MPU Core (must match)
• Operating Temperature Range: -40°C ~ 80°C (must match)
• Series: Digi Connect ME® (must match)

The DC-ME-Y402-S-UPW qualifies as a parametric equivalent based on these core electrical and mechanical specifications. Variation in Flash memory size (16MB vs. 4MB) does not preclude substitution when system requirements permit reduced storage capacity.

Parameter Comparison

Engineering Selection Recommendations

The DC-ME-Y402-S-UPW is an active product offering from Digi and serves as the primary substitute for the discontinued DC-ME-Y413-C-B. Both modules maintain identical processor architecture, speed, RAM capacity, physical dimensions, and thermal operating range. Both are RoHS Compliant and REACH Unaffected, ensuring regulatory alignment.

The primary design consideration is Flash memory capacity: the substitute provides 4MB Flash versus the original 16MB. Selection of DC-ME-Y402-S-UPW is appropriate when application firmware and data storage requirements fit within 4MB capacity. For applications requiring the full 16MB Flash allocation, alternative solutions within the Digi Connect ME® series should be evaluated.

Frequently Asked Questions (FAQ)

Q: Can DC-ME-Y402-S-UPW directly replace DC-ME-Y413-C-B in existing designs?

A: Yes, provided application firmware and storage requirements do not exceed 4MB Flash capacity. All electrical, mechanical, and thermal parameters are identical. Physical footprint and connector type match exactly.

Q: What is the primary difference between these modules?

A: Flash memory size differs: DC-ME-Y413-C-B provides 16MB, while DC-ME-Y402-S-UPW provides 4MB. RAM capacity (8MB) and all other specifications remain identical.

Q: Are both modules RoHS compliant?

A: Yes. Both DC-ME-Y413-C-B and DC-ME-Y402-S-UPW are RoHS Compliant and REACH Unaffected.

Q: What is the availability status of these modules?

A: DC-ME-Y413-C-B is discontinued at DiGi Electronics. DC-ME-Y402-S-UPW is currently active with 908 pieces in stock.

Q: Do these modules share the same connector interface?

A: Yes. Both modules use RJ45 connectors and maintain identical physical dimensions of 1.450" L x 0.750" W (36.70mm x 19.10mm).

Q: Are there thermal operating range differences?

A: No. Both modules operate across the identical temperature range of -40°C to 80°C.