DC-ME-Y413-C Equivalent & Substitute Parts

Part Overview

The DC-ME-Y413-C is an embedded module from Digi's Connect ME® series, featuring an ARM926EJ-S processor running at 75MHz with 8MB RAM and 16MB Flash storage. This module is designed for embedded networking applications requiring compact form factor and integrated RJ45 connectivity.

The DC-ME-Y413-C is classified as obsolete. Identifying equivalent substitute parts is necessary to support legacy system maintenance, design updates, and procurement continuity when original inventory becomes unavailable.

Substiute Parts

DC-ME-Y413-C

DigiIn Stock: 979DC-ME-Y413-C Datasheet

Current PartRFQ

DC-ME-Y402-S-UPW

DigiIn Stock: 1005DC-ME-Y402-S-UPW Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DC-ME-Y413-C is determined by the following critical parameters:

Core Compatibility Parameters:

• Identical processor architecture (ARM926EJ-S, NS9210)
• Matching processor speed (75MHz)
• Identical RAM capacity (8MB)
• Identical connector type (RJ45)
• Identical physical dimensions (1.450" L x 0.750" W)
• Identical operating temperature range (-40°C ~ 80°C)
• Same module/board type classification (MPU Core)

Allowable Variation:

• Flash memory size may differ from the original 16MB specification

The DC-ME-Y402-S-UPW meets all core compatibility parameters while featuring a reduced Flash size of 4MB, making it a valid parametric equivalent within the Digi Connect ME® embedded module family.

Parameter Comparison

Engineering Selection Recommendations

The DC-ME-Y402-S-UPW is a valid substitute for the DC-ME-Y413-C based on matching core processor architecture, speed, RAM capacity, connector type, physical dimensions, and operating temperature specifications.

The primary difference is Flash memory capacity: the substitute provides 4MB Flash compared to the original 16MB. This reduction must be evaluated against application firmware and data storage requirements.

The DC-ME-Y402-S-UPW holds Active product status, ensuring ongoing availability and support. The substitute carries RoHS Compliant certification, providing environmental compliance advantages over the obsolete original part.

Both parts maintain identical REACH compliance status and HTSUS classification, supporting regulatory and procurement consistency.

Frequently Asked Questions (FAQ)

Q: What makes the DC-ME-Y402-S-UPW a valid substitute for the DC-ME-Y413-C?

A: Both modules share identical processor architecture (ARM926EJ-S, NS9210), operating speed (75MHz), RAM capacity (8MB), connector type (RJ45), physical dimensions, and operating temperature range. These parameters define functional and mechanical compatibility within the Digi Connect ME® embedded module family.

Q: What is the key difference between these parts?

A: The DC-ME-Y402-S-UPW features 4MB Flash memory compared to the DC-ME-Y413-C's 16MB Flash. Applications requiring greater than 4MB Flash storage capacity cannot use this substitute without design modification.

Q: Can I use the DC-ME-Y402-S-UPW as a direct replacement in existing designs?

A: Direct replacement is possible only if the application firmware and data storage requirements fit within the 4MB Flash limitation. Physical form factor and electrical interface compatibility are maintained.

Q: What is the product status difference?

A: The DC-ME-Y413-C is obsolete, indicating end-of-life status. The DC-ME-Y402-S-UPW is Active, ensuring continued manufacturing, availability, and technical support.

Q: Are there compliance differences?

A: The DC-ME-Y402-S-UPW carries RoHS Compliant certification. Both parts maintain identical REACH compliance status and HTSUS classification.

Q: What packaging is available for the substitute?

A: The DC-ME-Y402-S-UPW is supplied in Bulk packaging.