DBMME25PF D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The DBMME25PF is a 25-position D-Sub plug connector manufactured by ITT Cannon, LLC, featuring male pins with right-angle solder termination and panel mount through-hole installation. This connector is actively produced and maintains full RoHS compliance with unlimited moisture sensitivity rating. Alternative equivalent parts may be required due to supply availability, lead time considerations, or specific procurement requirements within your supply chain.

Substiute Parts

DBMME25PF

ITT Cannon, LLCIn Stock: 722DBMME25PF Datasheet

Current PartRFQ

M83513/10-D01CP

GlenairIn Stock: 980M83513/10-D01CP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DBMME25PF is determined by the following critical parameters:

• Connector Category: D-Sub, D-Shaped Connectors
• Connector Type: Plug configuration with male pins
• Position Count: 25 positions
• Row Configuration: 2-row layout
• Shell Size: Size 3 (DB, B)
• Mounting Configuration: Panel mount, through-hole, right-angle orientation
• Termination Method: Solder attachment
• Contact Finish: Gold plating
• Operating Temperature Range: -55°C to 150°C
• Current Capacity: 7.5A
• Compliance: RoHS compliant, MSL 1 (Unlimited)

The substitute part M83513/10-D01CP from Glenair is listed as an equivalent option based on functional compatibility within the D-Sub connector category and active product status.

Parameter Comparison

Engineering Selection Recommendations

Both the DBMME25PF and M83513/10-D01CP maintain active product status with identical MSL ratings and export classifications. The DBMME25PF is the primary specification part with established inventory (683 pcs). The M83513/10-D01CP serves as a documented equivalent option with available inventory (907 pcs) and confirmed REACH compliance status. Selection between these parts should be based on procurement lead times, inventory availability, and supply chain requirements rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the DBMME25PF?

A: Substitute parts must maintain the same D-Sub connector category, 25-position configuration, 2-row layout, shell size 3 (DB, B), right-angle solder termination, and operating temperature range of -55°C to 150°C. Both parts must carry active product status and RoHS compliance.

Q: Are there packaging differences between the main part and substitute?

A: The DBMME25PF packaging specification is not detailed in the technical data. The M83513/10-D01CP is supplied in bulk packaging. Confirm packaging requirements with your procurement department before finalizing part selection.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Unlimited) indicates unlimited shelf life under standard storage conditions without moisture sensitivity concerns. Both the DBMME25PF and M83513/10-D01CP carry this rating, ensuring equivalent moisture handling characteristics.

Q: Are both parts compliant with export regulations?

A: Both parts are classified as EAR99 under export control regulations. The M83513/10-D01CP carries confirmed REACH Unaffected status, while REACH information for the DBMME25PF is available upon request from ITT Cannon, LLC.

Q: Can I use these parts interchangeably in my design?

A: Interchangeability depends on your specific mechanical and electrical requirements. Verify that the connector orientation, pin assignment, and mounting configuration align with your PCB layout and enclosure design before implementation.