DB59BNCPL2/4-25 Equivalent & Substitute Parts

Part Overview

The DB59BNCPL2/4-25 is a coaxial connector from Belden Inc. designed for RG59 cable applications with BNC plenum configuration in a 25-pack format. This part is classified as obsolete, making equivalent substitute parts necessary for ongoing procurement and system maintenance. Active alternatives are available that maintain the same electrical and mechanical specifications required for RF coaxial connector applications.

Substiute Parts

DB59BNCPL2/4-25

Belden Inc.In Stock: 830DB59BNCPL2/4-25 Datasheet

Current PartRFQ

1506ABHD1

Belden Inc.In Stock: 11681506ABHD1 Datasheet

MFR RecommendedRFQ

FSNS59BNCPL-25

Belden Inc.In Stock: 1200FSNS59BNCPL-25 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DB59BNCPL2/4-25 is determined by the following critical parameters:

• Cable Compatibility: RG59 coaxial cable type
• Connector Interface: BNC plenum configuration
• Electrical Classification: RF coaxial connector category
• Regulatory Compliance: REACH Unaffected status and EAR99 ECCN classification
• Tariff Classification: HTSUS code 8536.69.4010

The substitute parts listed below maintain these core specifications, ensuring functional and mechanical compatibility with systems designed for the DB59BNCPL2/4-25. Both alternatives are manufactured by Belden Inc. and carry active product status, providing reliable long-term availability.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts—1506ABHD1 and FSNS59BNCPL-25—are active products from Belden Inc. with identical regulatory compliance profiles to the obsolete DB59BNCPL2/4-25. Selection between these alternatives should be based on packaging requirements and inventory availability:

• 1506ABHD1: Supplied in bulk packaging with 50-piece quantity per unit. Moisture Sensitivity Level (MSL) rated at 1 (Unlimited).
• FSNS59BNCPL-25: Supplied in bulk packaging with 25-piece quantity per unit. MSL classified as Not Applicable.

Both parts maintain full compliance with REACH regulations and EAR99 export classification, ensuring regulatory continuity for applications previously using the DB59BNCPL2/4-25.

Frequently Asked Questions (FAQ)

Q: Can 1506ABHD1 and FSNS59BNCPL-25 be used interchangeably with DB59BNCPL2/4-25?

A: Yes. Both substitute parts maintain identical electrical and mechanical specifications for RG59 BNC plenum connectors with PL2/4 configuration. The primary difference is packaging quantity and moisture sensitivity classification.

Q: What is the difference between the two substitute parts?

A: The 1506ABHD1 is packaged in 50-piece quantities with MSL 1 (Unlimited) rating, while FSNS59BNCPL-25 is packaged in 25-piece quantities with MSL Not Applicable. Both are functionally equivalent for RF coaxial connector applications.

Q: Why is the original DB59BNCPL2/4-25 listed as obsolete?

A: Product obsolescence is determined by the manufacturer. Active alternatives with identical specifications are available to ensure continued system support and component availability.

Q: Are there any regulatory differences between these parts?

A: No. All three parts share identical REACH status (REACH Unaffected), ECCN classification (EAR99), and HTSUS tariff code (8536.69.4010).

Q: Which substitute should I select for new designs?

A: Either substitute is suitable for new designs. Selection should be based on packaging requirements and inventory needs. Both are active products with established supply chains.