DB206L-BP Bridge Rectifier Single Phase Standard 800 V Through Hole

Part Overview

The DB206L-BP is a single-phase bridge rectifier manufactured by Micro Commercial Co, designed for standard 800 V applications in through-hole mounting configurations. This component operates within the temperature range of -55°C to 150°C and delivers 2 A average rectified current. The DB206L-BP is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and ongoing production requirements.

Substiute Parts

DB206L-BP

Micro Commercial CoIn Stock: 827DB206L-BP Datasheet

Current PartRFQ

DB207L-BP

Micro Commercial CoIn Stock: 1015DB207L-BP Datasheet

MFR RecommendedRFQ

DB206-BP

Micro Commercial CoIn Stock: 811DB206-BP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DB206L-BP is determined by the following critical parameters:

Electrical Compatibility Criteria:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 800 V or higher
• Current - Average Rectified (Io): 2 A or higher
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 2 A or lower
• Current - Reverse Leakage @ Vr: 10 µA @ rated voltage or lower
• Operating Temperature Range: -55°C ~ 150°C (TJ) or wider

Mechanical Compatibility Criteria:

• Mounting Type: Through Hole
• Package / Case: 4-EDIP (0.321", 8.15mm)
• Supplier Device Package: DBL-1 or DB-1

Compliance Criteria:

• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8541.10.0080

Two substitute parts meet these criteria: DB207L-BP (manufacturer-recommended substitute with higher voltage rating) and DB206-BP (parametric equivalent with identical electrical specifications).

Parameter Comparison

Engineering Selection Recommendations

DB207L-BP (Manufacturer-Recommended Substitute): The DB207L-BP is the manufacturer-recommended substitute for the obsolete DB206L-BP. This component is currently in active production status with 987 pieces in stock. The DB207L-BP maintains identical electrical performance in forward voltage drop (1.1 V @ 2 A), reverse leakage current (10 µA), and operating temperature range (-55°C ~ 150°C). The primary distinction is an elevated peak reverse voltage rating of 1 kV compared to the 800 V specification of the DB206L-BP. This higher voltage rating provides additional design margin and is fully compatible with applications designed for 800 V operation. Both components share identical mechanical specifications: 4-EDIP package format, through-hole mounting, and DBL-1 supplier device package designation. Compliance certifications (REACH Unaffected, EAR99, HTSUS 8541.10.0080) are identical.

DB206-BP (Parametric Equivalent): The DB206-BP is a parametric equivalent offering identical electrical specifications to the DB206L-BP: 800 V peak reverse voltage, 2 A average rectified current, 1.1 V forward voltage drop @ 2 A, and 10 µA reverse leakage current @ 800 V. This component is in active production status with 765 pieces in stock. The DB206-BP differs from the DB206L-BP only in packaging designation (DB-1 versus DBL-1 supplier device package) while maintaining the same 4-EDIP physical form factor. This component is suitable for direct replacement in applications requiring exact electrical parameter matching.

Both substitute parts satisfy compliance and regulatory requirements identical to the original DB206L-BP component.

Frequently Asked Questions (FAQ)

Q: Can DB207L-BP be used as a direct replacement for DB206L-BP in all applications?

A: The DB207L-BP is electrically compatible with all applications designed for DB206L-BP. The 1 kV peak reverse voltage rating of DB207L-BP exceeds the 800 V requirement of DB206L-BP, providing additional voltage margin. Forward voltage drop, reverse leakage current, and operating temperature specifications are identical. Physical mounting and package dimensions are identical. The component is suitable for direct substitution.

Q: What is the difference between DB206-BP and DB207L-BP?

A: DB206-BP and DB207L-BP differ in peak reverse voltage rating: DB206-BP is rated for 800 V while DB207L-BP is rated for 1 kV. All other electrical parameters are identical. Both are active production components. DB207L-BP is the manufacturer-recommended substitute for the obsolete DB206L-BP.

Q: Are the package dimensions identical across all three parts?

A: Yes. DB206L-BP, DB207L-BP, and DB206-BP all use the 4-EDIP package format with dimensions of 0.321" (8.15mm). All three components are through-hole mounted and physically interchangeable in PCB layouts.

Q: What is the significance of the DBL-1 versus DB-1 supplier device package designation?

A: Both DBL-1 and DB-1 designations refer to the same physical 4-EDIP package format. The designation difference reflects supplier packaging conventions and does not affect electrical performance or physical compatibility.

Q: Are compliance certifications identical across all substitute parts?

A: Yes. DB206L-BP, DB207L-BP, and DB206-BP all carry identical compliance status: REACH Unaffected, ECCN EAR99, and HTSUS 8541.10.0080.

Q: Why is DB206L-BP classified as obsolete?

A: The DB206L-BP is listed as obsolete in the manufacturer's product portfolio. Active equivalent components (DB207L-BP and DB206-BP) are available for new designs and production requirements.