DAP15P565TXLF D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The DAP15P565TXLF is a 15-position D-Sub plug connector manufactured by Amphenol ICC (FCI) with right-angle through-hole solder termination. This connector is actively produced and maintains inventory availability of 890 pieces. The part is RoHS compliant and rated for 1000V operation across an extended temperature range of -55°C to 125°C. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications requiring 15-position D-Sub plug connectors with identical mounting and termination characteristics.

Substiute Parts

DAP15P565TXLF

Amphenol ICC (FCI)In Stock: 955DAP15P565TXLF Datasheet

Current PartRFQ

09662626812

HARTINGIn Stock: 93609662626812 Datasheet

MFR RecommendedRFQ

09662627812

HARTINGIn Stock: 102709662627812 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DAP15P565TXLF are qualified based on the following critical parameters that must match or exceed the original specification:

• Connector Type: Plug with Male Pins
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 7.5A minimum per contact
• Operating Temperature Range: -55°C to 125°C minimum
• Material Flammability Rating: UL94 V-0
• Contact Material: Copper Alloy

The substitute parts identified (HARTING 09662626812 and 09662627812) meet all critical electrical and mechanical parameters. Both maintain the same connector configuration, pin count, mounting orientation, and thermal operating range. Compliance certifications (RoHS3, REACH Unaffected) and flammability ratings align with or exceed the original specification.

Parameter Comparison

Engineering Selection Recommendations

Both HARTING substitute parts (09662626812 and 09662627812) are actively produced and maintain equivalent or superior compliance certifications. The HARTING parts carry ROHS3 compliance and REACH Unaffected status, exceeding the original RoHS Compliant designation. All three parts maintain UL94 V-0 flammability ratings and identical electrical specifications for current and voltage ratings.

The primary distinction between the HARTING substitutes and the original Amphenol ICC part is the dielectric material composition. The HARTING parts utilize Polybutylene Terephthalate (PBT) with polyester and glass filling, while the original specifies thermoplastic dielectric material. Both material systems support the identical operating temperature range and flammability classification.

Selection between the two HARTING alternatives should be based on inventory availability and specific application requirements. Both parts are functionally equivalent for D-Sub plug applications requiring 15-position, right-angle solder termination with 7.5A per-contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09662626812 or 09662627812 be used as direct replacements for DAP15P565TXLF?

A: Yes. Both HARTING parts meet all critical electrical and mechanical parameters: 15-position D-Sub plug configuration, right-angle through-hole solder termination, 7.5A per-contact current rating, 1000V voltage rating, and -55°C to 125°C operating temperature range. Shell size, connector layout, and contact material specifications are identical.

Q: What is the difference between the two HARTING substitute parts?

A: HARTING 09662626812 and 09662627812 are functionally equivalent. Both maintain identical electrical ratings, connector configuration, and compliance certifications. Differences in secondary features (such as board lock implementation) do not affect substitution eligibility. Selection should be based on inventory availability and specific application requirements.

Q: Are there compliance or certification differences between the original and substitute parts?

A: The HARTING substitutes carry ROHS3 compliance and REACH Unaffected status, which exceed the original RoHS Compliant designation. All three parts maintain UL94 V-0 flammability ratings. Both substitute parts are actively produced with current inventory availability.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: connector type (plug with male pins), position count (15), row configuration (2), shell size (2 DA/A), mounting type (through-hole right angle), termination method (solder), current rating (7.5A minimum), voltage rating (1000V), operating temperature range (-55°C to 125°C), and flammability classification (UL94 V-0).

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. The DAP15P565TXLF, 09662626812, and 09662627812 share identical mounting footprints, pin configurations, and solder termination specifications. PCB designs do not require modification for part substitution.