DAMM15SB D-Sub Receptacle 15 Position Connector

Part Overview

The DAMM15SB is a 15-position D-Sub receptacle connector manufactured by ITT Cannon, LLC, designed for panel mount, through-hole solder termination applications. This connector features female sockets with a 2-row (DA, A) shell layout and is actively produced. The part is RoHS compliant and rated for 7.5A continuous current across an operating temperature range of -55°C to 150°C. Alternative equivalent parts may be required due to inventory constraints, application-specific mounting requirements, or compliance specifications for aerospace and defense applications.

Substiute Parts

DAMM15SB

ITT Cannon, LLCIn Stock: 833DAMM15SB Datasheet

Current PartRFQ

1757828-2

TE Connectivity Aerospace, Defense and MarineIn Stock: 12231757828-2 Datasheet

DirectRFQ

628-015-220-041

Mercury United Electronics, Inc.In Stock: 1147628-015-220-041 Datasheet

SimilarRFQ

628-015-220-042

Mercury United Electronics, Inc.In Stock: 1113628-015-220-042 Datasheet

SimilarRFQ

7-1393740-1

TE Connectivity AMP ConnectorsIn Stock: 15037-1393740-1 Datasheet

SimilarRFQ

M24308/23-8F

TE Connectivity Aerospace, Defense and MarineIn Stock: 1399M24308/23-8F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DAMM15SB is determined by the following critical parameters:

Primary Matching Criteria:

• Connector type: D-Sub receptacle, female sockets
• Position count: 15 positions
• Shell layout: 2-row (DA, A) configuration
• Termination: Solder
• Mounting: Through-hole capability

Secondary Compatibility Factors:

• Current rating: Minimum 3A per contact (DAMM15SB rated 7.5A)
• Operating temperature range: Minimum -55°C to 85°C (DAMM15SB rated to 150°C)
• Contact finish: Gold plated
• Shell material: Steel with corrosion-resistant plating
• RoHS compliance status for regulatory requirements

The four substitute parts listed (1757828-2, 628-015-220-041, 628-015-220-042, 7-1393740-1, M24308/23-8F) meet the primary matching criteria. Variations in current rating, temperature range, shell finish, and compliance certifications create distinct application boundaries for each substitute.

Parameter Comparison

Engineering Selection Recommendations

1757828-2 (TE Connectivity Aerospace, Defense and Marine) Select this part for aerospace and defense applications requiring MIL-DTL-24308 compliance. Current rating of 5A is suitable for signal-level applications. Operating temperature range of -55°C to 125°C covers most military specifications. ROHS3 compliance and REACH affected status require verification against program requirements. Yellow chromate plating matches the main part specification.

628-015-220-041 and 628-015-220-042 (Mercury United Electronics, Inc.) These parts are suitable for commercial and industrial applications with lower current requirements (3A per contact). Operating temperature limited to -55°C to 85°C restricts use in high-temperature environments. Both parts feature shielded construction and UL94 V-0 flammability rating. ROHS3 compliance and REACH unaffected status (628-015-220-041) or unaffected status (628-015-220-042) provide regulatory flexibility. Nickel plating differs from the main part's yellow chromate finish.

7-1393740-1 (TE Connectivity AMP Connectors) This AMPLIMITE HD-20 series part is RoHS compliant and suitable for general commercial applications. Multiple parameters are not specified, requiring direct manufacturer consultation for current rating, operating temperature, and shell material specifications before final selection.

M24308/23-8F (TE Connectivity Aerospace, Defense and Marine) This military-grade MIL-DTL-24308 part is suitable for aerospace and defense applications. Current rating of 5A and operating temperature range of -55°C to 125°C align with military specifications. RoHS non-compliance and cadmium plating restrict use in programs requiring RoHS compliance or cadmium-free construction. REACH affected status requires program-level verification.

Frequently Asked Questions (FAQ)

Q: Can I substitute the DAMM15SB with any of these parts in a high-temperature application? A: No. The DAMM15SB operates to 150°C. Substitutes 628-015-220-041 and 628-015-220-042 are limited to 85°C. Parts 1757828-2 and M24308/23-8F operate to 125°C. Select based on your application's maximum operating temperature requirement.

Q: What is the difference between the Mercury parts (628-015-220-041 and 628-015-220-042)? A: Both are electrically and mechanically equivalent 15-position D-Sub receptacles with identical electrical ratings and temperature ranges. The primary difference is packaging: 628-015-220-041 is supplied in bulk, while 628-015-220-042 is supplied in trays. Both feature shielded construction and nickel plating.

Q: Are all substitutes RoHS compliant? A: No. The DAMM15SB, 1757828-2, 628-015-220-041, 628-015-220-042, and 7-1393740-1 are RoHS compliant. M24308/23-8F is RoHS non-compliant due to cadmium plating. Verify RoHS compliance requirements for your application before selection.

Q: Which substitute is best for military applications? A: Both 1757828-2 and M24308/23-8F are MIL-DTL-24308 qualified military connectors. 1757828-2 is ROHS3 compliant, while M24308/23-8F is RoHS non-compliant. Select based on your program's RoHS requirements.

Q: What is the current-carrying capacity difference between the main part and substitutes? A: The DAMM15SB is rated for 7.5A. Substitutes 1757828-2 and M24308/23-8F are rated for 5A. Mercury parts 628-015-220-041 and 628-015-220-042 are rated for 3A per contact. Verify your application's current requirements before substitution.

Q: Can I use a substitute with a lower current rating if my application draws less current? A: Yes, provided your application's maximum current does not exceed the substitute's rating. A 3A-rated part can safely carry currents up to 3A. Ensure adequate margin for transient conditions and future design modifications.

Q: What does "panel mount" mean for the DAMM15SB, and do all substitutes support this? A: Panel mount indicates the connector is designed for installation through a panel or enclosure wall with the flange on the rear side. The DAMM15SB specifies panel mount with through-hole termination. Substitutes specify through-hole mounting but do not explicitly state panel mount capability. Verify mechanical fit and flange configuration with the manufacturer before substitution.