DAM15P500CSP82 Equivalent & Substitute Parts

Part Overview

The DAM15P500CSP82 is a 15-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (FCI). This connector is designed for through-hole mounting applications requiring signal transmission in industrial and commercial electronics. The part is currently active in production with 880 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector's critical specifications, including position count, mounting type, termination method, and environmental ratings.

Substiute Parts

DAM15P500CSP82

Amphenol ICC (FCI)In Stock: 925DAM15P500CSP82 Datasheet

Current PartRFQ

09662626812

HARTINGIn Stock: 93609662626812 Datasheet

MFR RecommendedRFQ

09662627812

HARTINGIn Stock: 102709662627812 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DAM15P500CSP82 are qualified based on strict equivalence of the following parameters:

• Connector type: D-Sub plug with male pins
• Position count: 15 positions in 2-row configuration
• Shell size: 2 (DA, A) layout
• Mounting orientation: Through-hole, right-angle
• Termination method: Solder
• Current and voltage ratings: 7.5A at 300V minimum
• Operating temperature range: -55°C to 125°C minimum
• Flammability rating: UL94 V-0

The substitute parts identified (09662626812 and 09662627812, both from HARTING) maintain all critical electrical and mechanical parameters. Differences in shell finish, contact material composition, and compliance certifications do not affect functional interchangeability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

The HARTING parts 09662626812 and 09662627812 are functionally equivalent to the DAM15P500CSP82 across all critical electrical and mechanical parameters. Both substitute parts maintain the required current rating, voltage rating, temperature range, and flammability classification.

The primary distinction between the main part and substitutes is regulatory compliance status. The DAM15P500CSP82 is RoHS non-compliant, while both HARTING substitutes are ROHS3 compliant. For applications subject to RoHS directives or equivalent environmental regulations, the HARTING parts provide compliance advantage. Both HARTING substitutes also include board lock and grounding indent features not specified in the main part.

Selection between 09662626812 and 09662627812 depends on application-specific requirements, as both maintain identical electrical and mechanical specifications. Inventory availability shows 886 units for 09662626812 and 990 units for 09662627812.

Frequently Asked Questions (FAQ)

Q: Can 09662626812 or 09662627812 be used as direct replacements for DAM15P500CSP82?

A: Yes. Both HARTING parts maintain equivalent electrical ratings (7.5A, 300V), operating temperature range (-55°C to 125°C), connector configuration (15-position D-Sub plug, right-angle solder), and flammability rating (UL94 V-0). They are mechanically and electrically interchangeable within the specified parameter envelope.

Q: What are the differences between the main part and substitute parts?

A: The main differences are shell finish (cadmium plated vs. unfinished steel), contact material composition (brass vs. copper alloy), and regulatory compliance status (RoHS non-compliant vs. ROHS3 compliant). These differences do not affect functional interchangeability for the specified electrical and mechanical requirements.

Q: Are there differences between the two HARTING substitute parts?

A: Both 09662626812 and 09662627812 maintain identical electrical and mechanical specifications. Differences exist only in inventory levels and secondary features. Consult HARTING documentation for any application-specific distinctions.

Q: What packaging format is available for each part?

A: The DAM15P500CSP82 is supplied in tray packaging. Both HARTING substitutes (09662626812 and 09662627812) are supplied in bulk packaging. Packaging format selection depends on assembly process requirements and inventory management practices.

Q: Is RoHS compliance a factor in selecting a substitute?

A: RoHS compliance status is determined by application regulatory requirements. The DAM15P500CSP82 is RoHS non-compliant, while both HARTING substitutes are ROHS3 compliant. Applications subject to RoHS directives or equivalent environmental regulations should specify the HARTING parts.