DAM15P400 Equivalent & Substitute Parts

Part Overview

The DAM15P400 is a 15-position D-Sub plug connector manufactured by Amphenol ICC (FCI) with male pins, designed for panel mount through-hole applications. This connector features wire wrap termination, steel shell with yellow cadmium plating, and gold-plated contacts rated for 7.5A per contact at 300V. The product is currently active in production status with 940 units in stock.

Substitute parts become necessary when the primary part reaches end-of-life status, experiences supply constraints, or when design requirements permit alternative configurations that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Panel Mount, Through Hole
Termination	Wire Wrap
Contact Type	Signal
Material Flammability Rating	UL94 V-0
Current Rating	7.5A per Contact
Voltage Rating	300V
Contact Material	Brass
Operating Temperature Range	-55°C ~ 125°C

Substitute Part Grouping Explanation

Substitution eligibility for the DAM15P400 is determined by strict alignment with the following core parameters:

Connector style and type (D-Sub, Plug, Male Pins)
Position count and row configuration (15 positions, 2 rows)
Shell size and layout (Size 2, DA/A configuration)
Mounting method (Panel Mount, Through Hole)
Termination technology (Wire Wrap)
Contact material (Brass)
Flammability compliance (UL94 V-0)

The substitute part 172-015-142R011 manufactured by NorComp Inc. meets these core substitution criteria. However, variations exist in current rating, voltage rating specification, operating temperature range, shell finish, and product status that must be evaluated for specific application requirements.

Parameter Comparison

Parameter	DAM15P400 (Amphenol ICC)	172-015-142R011 (NorComp Inc.)
Connector Style	D-Sub	D-Sub
Connector Type	Plug, Male Pins	Plug, Male Pins
Number of Positions	15	15
Number of Rows	2	2
Shell Size, Connector Layout	2 (DA, A)	2 (DA, A)
Mounting Type	Panel Mount, Through Hole	Panel Mount, Through Hole
Termination	Wire Wrap	Wire Wrap
Contact Type	Signal	Signal
Material Flammability Rating	UL94 V-0	UL94 V-0
Current Rating (Amps)	7.5A per Contact	5A per Contact
Voltage Rating	300V	Not Specified
Contact Material	Brass	Brass
Operating Temperature Range	-55°C ~ 125°C	-50°C ~ 100°C
Shell Material, Finish	Steel, Yellow Cadmium Plated	Steel, Tin Plated
Contact Finish	Gold	Gold (Flash)
Product Status	Active	Obsolete
RoHS Status	RoHS Non-Compliant	ROHS3 Compliant

Engineering Selection Recommendations

The 172-015-142R011 substitute part shares the fundamental D-Sub connector architecture, pin configuration, and mounting characteristics with the DAM15P400. Both connectors maintain UL94 V-0 flammability compliance and brass contact material.

Selection between these parts depends on application-specific constraints:

The DAM15P400 remains the primary choice for applications requiring the full 7.5A per contact current capacity, 300V voltage rating, and extended operating temperature range of -55°C to 125°C. This part is currently in active production status.

The 172-015-142R011 is classified as obsolete and carries a reduced current rating of 5A per contact. This substitute is suitable only for applications where current requirements do not exceed 5A per contact and operating temperatures remain within the -50°C to 100°C range. The ROHS3 compliance status of this part may be advantageous for applications subject to RoHS3 regulatory requirements, whereas the DAM15P400 is RoHS non-compliant.

Frequently Asked Questions (FAQ)

Q: Can the 172-015-142R011 be used as a direct replacement for the DAM15P400?

A: The 172-015-142R011 shares the same D-Sub connector style, 15-position configuration, and panel mount through-hole mounting method. However, the reduced current rating (5A versus 7.5A per contact), narrower operating temperature range (-50°C to 100°C versus -55°C to 125°C), and obsolete product status require application-level verification before substitution.

Q: What are the key differences in shell finish between these connectors?

A: The DAM15P400 features a yellow cadmium-plated steel shell, while the 172-015-142R011 uses tin plating. Both finishes provide corrosion resistance; however, the specific environmental and application requirements may influence finish selection.

Q: Does the contact finish thickness difference affect compatibility?

A: The DAM15P400 specifies gold plating without thickness notation, while the 172-015-142R011 specifies flash gold plating. Both provide electrical conductivity and corrosion resistance suitable for signal-level D-Sub applications. Flash plating represents a thinner gold layer and may be appropriate for lower-wear applications.

Q: What is the significance of the RoHS compliance difference?

A: The DAM15P400 is RoHS non-compliant, while the 172-015-142R011 is ROHS3 compliant. Applications subject to RoHS3 regulatory requirements must use the 172-015-142R011 or identify an alternative RoHS3-compliant part. Applications without RoHS3 requirements may use either connector.

Q: Are both connectors suitable for the same wire gauge applications?

A: Wire gauge specifications are not provided for either connector in the available data. Termination compatibility is determined by the wire wrap termination method common to both parts. Specific wire gauge compatibility must be confirmed through detailed connector documentation.

Q: What inventory considerations apply to these parts?

A: The DAM15P400 has 940 units in stock with active production status, ensuring ongoing availability. The 172-015-142R011 has 935 units in stock but is classified as obsolete, indicating no future production and potential inventory depletion over time.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message