DAM15P043N D-Sub Plug 15 Position Connector

Part Overview

The DAM15P043N is a 15 position D-Sub plug connector manufactured by Amphenol ICC (FCI) in the DM HE508 series. This male pin connector features solder cup termination and is designed for free hanging (in-line) mounting applications. The part is currently active in production with 793 units in stock. Alternative models may be required due to inventory constraints, application-specific mounting requirements, or compliance needs in different regulatory environments.

Substiute Parts

DAM15P043N

Amphenol ICC (FCI)In Stock: 813DAM15P043N Datasheet

Current PartRFQ

171-015-103L021

NorComp Inc.In Stock: 1211171-015-103L021 Datasheet

MFR RecommendedRFQ

5-747908-2

TE Connectivity AMP ConnectorsIn Stock: 81835-747908-2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DAM15P043N is determined by the following critical parameters that must remain constant:

• Connector style: D-Sub
• Connector type: Plug, Male Pins
• Number of positions: 15
• Number of rows: 2
• Shell size and layout: 2 (DA, A)
• Termination method: Solder Cup

Two substitute parts are identified based on these core compatibility criteria:

171-015-103L021 (NorComp Inc.): Maintains the 15-position D-Sub plug configuration with solder cup termination but differs in mounting type (panel mount versus free hanging) and shell finish (nickel plated versus yellow cadmium plated).

5-747908-2 (TE Connectivity AMP Connectors): Maintains the 15-position D-Sub plug configuration with solder cup termination and free hanging mounting, matching the original mounting style. Shell finish differs (tin plated versus yellow cadmium plated).

Parameter Comparison

Engineering Selection Recommendations

For applications requiring free hanging (in-line) mounting with maximum current capacity: The DAM15P043N remains the primary choice with 7.5A per contact rating and 300V voltage rating. If the original part is unavailable, the 5-747908-2 from TE Connectivity maintains the same mounting configuration but operates at reduced current (3A) and voltage (250V) specifications.

For applications permitting panel mount configuration: The 171-015-103L021 from NorComp Inc. provides an alternative with panel mount capability. This part operates at 5A per contact and requires verification of voltage requirements, as this parameter is not specified. The NorComp part is ROHS3 compliant, whereas the original DAM15P043N is RoHS non-compliant.

For RoHS compliance requirements: Both substitute parts (171-015-103L021 and 5-747908-2) meet RoHS compliance standards, whereas the DAM15P043N does not. Selection between these two depends on mounting type requirements and current/voltage specifications of the application.

For extended temperature range applications: The DAM15P043N supports -55°C to 155°C operation. The 5-747908-2 supports -55°C to 105°C, and the 171-015-103L021 supports -50°C to 100°C. Applications requiring operation above 105°C should retain the original part.

Frequently Asked Questions (FAQ)

Q: Can the 171-015-103L021 be used as a direct replacement for the DAM15P043N?

A: The 171-015-103L021 maintains the core D-Sub 15-position plug configuration with solder cup termination. However, it is a panel mount connector, whereas the DAM15P043N is free hanging (in-line). Panel mount connectors require different PCB or enclosure mounting provisions. Direct mechanical substitution is not possible without redesign of the mounting interface.

Q: What are the current rating implications when substituting with the 5-747908-2?

A: The 5-747908-2 is rated for 3A per contact, compared to 7.5A per contact for the DAM15P043N. Applications designed for the full 7.5A capacity cannot be directly substituted without circuit redesign or current limiting measures. Verify that the application current requirements do not exceed 3A per contact.

Q: Are there compliance differences between the three parts?

A: Yes. The DAM15P043N is RoHS non-compliant. Both the 171-015-103L021 (ROHS3 compliant) and 5-747908-2 (RoHS compliant) meet RoHS requirements. Applications subject to RoHS regulations must use one of the compliant substitute parts.

Q: What is the impact of different shell finishes on connector performance?

A: The DAM15P043N uses yellow cadmium plating, the 171-015-103L021 uses nickel plating, and the 5-747908-2 uses tin plating. These finishes affect corrosion resistance and environmental durability. Cadmium and nickel provide superior corrosion resistance in harsh environments. Tin plating is suitable for standard industrial applications. Selection depends on the operating environment and corrosion exposure requirements.

Q: Can the 171-015-103L021 be used in applications requiring the full operating temperature range of the DAM15P043N?

A: No. The 171-015-103L021 operates from -50°C to 100°C, whereas the DAM15P043N operates from -55°C to 155°C. Applications requiring operation below -50°C or above 100°C cannot use the NorComp part. The 5-747908-2 operates to -55°C to 105°C, providing better low-temperature coverage but still limited at the high end.