DA24658-15 Equivalent & Substitute Parts Reference

Part Overview

The DA24658-15 is a 15-position D-Sub deep straight backshell connector manufactured by ITT Cannon, LLC. This one-piece backshell accessory is designed for use with 15-position and HD26-position D-Sub connectors, featuring a 180° cable exit configuration. The connector is constructed from brass with gold plating and includes assembly hardware and cable clamp components. As an active product with RoHS compliance and unlimited moisture sensitivity rating, this backshell is suitable for applications requiring reliable D-Sub connector termination. Equivalent and substitute parts are identified based on matching connector position count, shell size compatibility, cable exit angle, and material specifications.

Substiute Parts

DA24658-15

ITT Cannon, LLCIn Stock: 1004DA24658-15 Datasheet

Current PartRFQ

DA24658

Cinch Connectivity SolutionsIn Stock: 907DA24658 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DA24658-15 is determined by the following critical parameters:

• Number of Positions: Must be 15 to maintain connector compatibility
• Compatible Shell Size: Must be Size A for mechanical fit
• Compatible D-Sub Size: Must support 15pos and HD26pos configurations
• Cable Exit Angle: Must be 180° for proper cable routing
• Accessory Type: Must be one-piece backshell configuration
• Material and Plating: Brass construction with gold plating ensures electrical performance and corrosion resistance
• Hardware Inclusion: Assembly hardware and cable clamp must be present

The substitute part DA24658 from Cinch Connectivity Solutions shares the same base part number designation and is classified as a position connector. However, compliance and material specifications differ and must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

DA24658-15 (ITT Cannon, LLC) is the primary specification. This part is RoHS compliant and maintains active product status, making it suitable for applications subject to environmental and regulatory compliance requirements.

DA24658 (Cinch Connectivity Solutions) is listed as a substitute based on shared base part number designation. However, this part is RoHS non-compliant. Selection of this substitute requires verification that the application does not mandate RoHS compliance. Both parts maintain identical Moisture Sensitivity Level (MSL) ratings and ECCN classifications. The difference in plating material (gold versus cadmium) and RoHS status represents the primary technical distinction between these options.

Component selection should prioritize the primary part number DA24658-15 for new designs and applications with regulatory compliance requirements. The substitute DA24658 may be considered only when RoHS non-compliance is acceptable and supply constraints necessitate alternative sourcing.

Frequently Asked Questions (FAQ)

Q: Can DA24658 be used as a direct replacement for DA24658-15?

A: DA24658 shares the same base part number but differs in RoHS compliance status and plating material. Substitution is possible only if the application does not require RoHS compliance and the plating material difference is acceptable for the intended electrical and environmental conditions.

Q: What determines compatibility between the backshell and D-Sub connectors?

A: Compatibility is determined by shell size (Size A), position count (15 positions), and supported D-Sub configurations (15pos and HD26pos). The 180° cable exit angle must match the connector's cable routing requirements.

Q: Are both parts available in the same packaging formats?

A: DA24658-15 packaging is not specified in the reference data. DA24658 is available in bulk packaging. Packaging availability should be confirmed with the respective manufacturers for procurement planning.

Q: What is the significance of the MSL rating for these backshells?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling. This classification applies to the backshell accessory and does not reflect the moisture sensitivity of mated connector contacts or other components.

Q: How do the HTSUS codes differ between these parts?

A: DA24658-15 carries HTSUS code 8536.69.4040, while DA24658 carries 8536.69.8000. These codes reflect tariff classification differences and may impact import duties and regulatory documentation requirements depending on origin and destination markets.