D9232-01 Equivalent & Substitute Parts

Part Overview

The D9232-01 is a 32-position DIP/DIL header connector with male pins, manufactured by Harwin Inc. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The connector features through-hole solder termination with tin contact finish and is designed for standard 0.100" (2.54mm) pitch applications with dual-row configuration.

Substiute Parts

D9232-01

Harwin Inc.In Stock: 810D9232-01 Datasheet

Current PartRFQ

150-90-632-00-001000

Mill-Max Manufacturing Corp.In Stock: 945150-90-632-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The D9232-01 can be substituted with the Mill-Max Manufacturing Corp. part number 150-90-632-00-001000 based on the following critical parameters:

• Connector Type Match: Both are DIP/DIL header connectors
• Position Count: Both feature 32 positions
• Pitch Specification: Both maintain 0.100" (2.54mm) pitch
• Row Configuration: Both have 2 rows with 0.600" (15.24mm) spacing
• Mounting & Termination: Both use through-hole solder termination
• Environmental Rating: Both have MSL 1 (Unlimited) moisture sensitivity

The primary difference lies in the contact type: the D9232-01 uses male pins, while the 150-90-632-00-001000 uses posts. Both contact types are compatible with standard DIP/DIL socket applications and PCB through-hole mounting.

Parameter Comparison

Engineering Selection Recommendations

The 150-90-632-00-001000 is the designated substitute for the obsolete D9232-01. Selection of this alternative is based on:

• Active Product Status: The Mill-Max part maintains current manufacturing and supply chain availability, eliminating obsolescence risk
• Dimensional Compatibility: Identical pitch, row spacing, and mounting footprint ensure direct PCB compatibility
• Compliance Alignment: Both parts share identical RoHS and REACH status, maintaining regulatory consistency in system designs
• Contact Interface: Post-type contacts in the substitute provide equivalent electrical and mechanical performance in standard DIP/DIL socket applications

Frequently Asked Questions (FAQ)

Q: Can the 150-90-632-00-001000 be used as a direct replacement for the D9232-01?

A: Yes. Both connectors share identical pitch (0.100"), row spacing (0.600"), position count (32), and mounting configuration. The contact type difference (male pin vs. post) does not prevent functional substitution in standard DIP/DIL socket applications.

Q: What is the difference between male pin and post contact types?

A: Male pins and posts are both acceptable contact geometries for DIP/DIL header connectors. Posts provide equivalent electrical conductivity and mechanical retention in socket interfaces. The choice between them depends on the mating socket design, which typically accommodates both types.

Q: Are there packaging differences between these parts?

A: The D9232-01 packaging is not specified in available data. The 150-90-632-00-001000 is supplied in tube packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS non-compliant and REACH Unaffected. Compliance status is identical, ensuring regulatory consistency in system designs.

Q: Why is the D9232-01 obsolete?

A: Manufacturer discontinuation of the D9232-01 necessitates substitution with active alternatives. The 150-90-632-00-001000 provides equivalent functionality with ongoing supply availability.