D9222-46 Equivalent & Substitute Parts

Part Overview

The D9222-46 is a 22-position DIP/DIL header connector with male pin contacts and tin finish, manufactured by Harwin Inc. This connector is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and procurement continuity. The part features through-hole solder termination and is commonly used in applications requiring dual-row header connectivity with 0.100" pitch spacing.

Substiute Parts

D9222-46

Harwin Inc.In Stock: 1099D9222-46 Datasheet

Current PartRFQ

150-10-422-00-001000

Mill-Max Manufacturing Corp.In Stock: 784150-10-422-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D9222-46 is determined by strict equivalence across the following critical parameters:

• Connector Type: DIP/DIL header configuration
• Position Count: 22 positions
• Pitch Spacing: 0.100" (2.54mm)
• Row Configuration: 2 rows with 0.400" (10.16mm) spacing
• Mounting & Termination: Through-hole solder mount
• Compliance: ROHS3 and REACH requirements

The substitute part 150-10-422-00-001000 (Mill-Max Manufacturing Corp.) meets all critical dimensional and functional parameters. The primary difference is the contact finish specification: the substitute uses gold plating rather than tin. Both finishes are compatible with standard solder termination processes and PCB assembly workflows.

Parameter Comparison

Engineering Selection Recommendations

The 150-10-422-00-001000 is the designated substitute for the obsolete D9222-46. Selection is based on the following factors:

Product Status: The D9222-46 is obsolete, while the 150-10-422-00-001000 maintains active production status, ensuring long-term availability and supply chain continuity.

Compliance Alignment: Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component procurement.

Dimensional Compatibility: All critical mechanical parameters—pitch, row spacing, position count, and mounting configuration—are identical between the two parts, ensuring direct PCB footprint compatibility.

Contact Finish Consideration: The substitute employs gold plating (10.0µin) versus tin (137.8µin) on the original. Gold contact finishes provide enhanced corrosion resistance and are standard in modern connector design. Both finishes are compatible with standard solder reflow and wave soldering processes.

Inventory Status: The 150-10-422-00-001000 is currently available with 763 units in stock, supporting immediate procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can the 150-10-422-00-001000 be used as a direct replacement for the D9222-46 on existing PCBs?

A: Yes. Both connectors share identical pitch (0.100"), row spacing (0.400"), position count (22), and through-hole solder termination. PCB footprints are mechanically compatible without modification.

Q: What is the difference between "Male Pin" and "Post" contact types?

A: Both designations refer to the protruding contact geometry used in header connectors. The functional behavior in solder termination and mating applications is equivalent for this connector category.

Q: Does the gold finish on the substitute part affect soldering or assembly processes?

A: No. Gold-plated contacts are standard in modern connector manufacturing and are fully compatible with standard solder reflow, wave soldering, and hand soldering processes. Gold finishes do not require special handling or process modifications.

Q: Are there any compliance or certification differences between the two parts?

A: Both parts maintain identical ROHS3 compliance, REACH unaffected status, and MSL rating (1 - Unlimited). No compliance gaps exist between the original and substitute.

Q: What is the packaging difference between the two parts?

A: The D9222-46 packaging is not specified in available data. The 150-10-422-00-001000 is supplied in tube packaging, which is standard for header connector distribution and does not affect functional performance.