D9214-01 Equivalent & Substitute Parts

Part Overview

The D9214-01 is a 14-position DIP/DIL header connector with male pins, manufactured by Harwin Inc. This through-hole component features a 0.100" (2.54mm) pitch and 0.300" (7.62mm) row spacing, designed for dual-row applications. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing production and maintenance applications. Equivalent parts must maintain identical electrical and mechanical specifications to ensure direct board-level compatibility without redesign.

Substiute Parts

D9214-01

Harwin Inc.In Stock: 987D9214-01 Datasheet

Current PartRFQ

150-90-314-00-001000

Mill-Max Manufacturing Corp.In Stock: 831150-90-314-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D9214-01 is based on strict equivalence of the following critical parameters:

• Connector Type: DIP/DIL header configuration
• Position Count: 14 positions
• Pitch: 0.100" (2.54mm) center-to-center spacing
• Row Configuration: 2 rows with 0.300" (7.62mm) spacing
• Mounting: Through-hole solder termination
• Contact Material: Tin or tin-lead finish

The substitute part 150-90-314-00-001000 from Mill-Max Manufacturing Corp. meets all critical mechanical and electrical parameters. The primary difference is the contact type (post vs. male pin) and contact finish composition (tin-lead vs. tin), both of which are acceptable variations within DIP header connector standards for equivalent functionality.

Parameter Comparison

Engineering Selection Recommendations

The 150-90-314-00-001000 is the designated manufacturer-recommended substitute for the obsolete D9214-01. Selection of this part is justified by:

• Active Product Status: The substitute maintains active production status, ensuring long-term availability and supply chain continuity.
• Mechanical Compatibility: Identical pitch, row spacing, and mounting configuration enable direct board-level substitution without layout modification.
• Compliance Alignment: Both parts share identical RoHS and REACH status, maintaining regulatory consistency in applications where the original part was specified.
• Moisture Sensitivity: Both parts carry MSL rating 1, indicating no moisture sensitivity requirements during storage and handling.

The contact finish difference (tin vs. tin-lead) and increased finish thickness on the substitute part do not compromise electrical performance or mechanical fit in standard DIP header applications.

Frequently Asked Questions (FAQ)

Q: Can the 150-90-314-00-001000 be used as a direct replacement for D9214-01 without board redesign?

A: Yes. The substitute maintains identical pitch (0.100"), row spacing (0.300"), position count (14), and through-hole solder termination. No PCB layout modification is required.

Q: What is the difference between male pin and post contact types in DIP headers?

A: Male pins and posts are both acceptable contact geometries for DIP header connectors. Both provide equivalent electrical connection and mechanical retention when soldered into standard 0.100" pitch PCB holes.

Q: Does the tin-lead finish on the substitute part affect compatibility?

A: No. Tin-lead finish is a standard alternative to pure tin in connector applications and provides equivalent electrical and mechanical performance. Both finishes are suitable for solder termination.

Q: Are there any compliance concerns when substituting the D9214-01?

A: Both parts carry identical RoHS non-compliant and REACH unaffected status. Applications using the original part maintain the same regulatory classification with the substitute.

Q: What is the packaging difference between these parts?

A: The D9214-01 packaging is not specified in available data. The 150-90-314-00-001000 is supplied in tube packaging, which is standard for DIP header connectors and does not affect component performance.