D9206-01 Equivalent & Substitute Parts

Part Overview

The D9206-01 is a 6-position DIP/DIL header connector with male pins, manufactured by Harwin Inc. This through-hole component features a 0.100" (2.54mm) pitch and tin contact finish. The part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement planning. Equivalent parts must maintain identical electrical and mechanical specifications to ensure direct interchangeability in existing circuit designs.

Substiute Parts

D9206-01

Harwin Inc.In Stock: 802D9206-01 Datasheet

Current PartRFQ

150-90-306-00-001000

Mill-Max Manufacturing Corp.In Stock: 737150-90-306-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 150-90-306-00-001000 (Mill-Max Manufacturing Corp.) qualifies as an equivalent based on the following critical parameters:

• Connector type: Both are DIP/DIL header connectors
• Position count: Both provide 6 positions
• Pitch specification: Both maintain 0.100" (2.54mm) pitch
• Row configuration: Both feature 2 rows with 0.300" (7.62mm) spacing
• Mounting method: Both are through-hole solder-terminated
• Color: Both are black
• Moisture sensitivity: Both rated MSL 1 (Unlimited)

The primary difference is contact type: the D9206-01 uses male pins while the 150-90-306-00-001000 uses posts. This distinction affects mating interface compatibility and must be evaluated against the specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The 150-90-306-00-001000 is available as an active product with current manufacturing support, addressing the obsolescence status of the D9206-01. Both parts maintain identical electrical and mechanical specifications for pitch, row configuration, and mounting method. The substitute part carries a thicker contact finish (200.0µin versus 137.8µin), which provides enhanced durability in solder joint formation and contact wear resistance.

Both parts share identical RoHS non-compliance and REACH unaffected status, ensuring regulatory consistency in applications where these certifications are not required. The contact type difference (male pin versus post) requires evaluation against the mating connector specification in the target application to confirm physical and electrical compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 150-90-306-00-001000 directly replace the D9206-01 in existing designs?

A: Direct replacement depends on the mating connector type. The D9206-01 male pins mate with female sockets, while the 150-90-306-00-001000 posts mate with female receptacles. Verify the mating connector specification before substitution.

Q: What is the significance of the contact finish difference?

A: The D9206-01 uses tin finish (137.8µin), while the 150-90-306-00-001000 uses tin-lead finish (200.0µin). The thicker tin-lead coating on the substitute provides improved solder wettability and contact durability. Both finishes are suitable for through-hole solder termination.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS non-compliant and REACH unaffected. Regulatory status is identical, so substitution does not introduce compliance concerns in applications where these standards do not apply.

Q: What does the packaging difference mean?

A: The D9206-01 packaging is unspecified in available data. The 150-90-306-00-001000 is supplied in tube packaging, which is standard for DIP header connectors and suitable for both manual and automated assembly processes.

Q: Are the pitch and row spacing specifications identical?

A: Yes. Both parts maintain 0.100" (2.54mm) pitch and 0.300" (7.62mm) row spacing, ensuring identical footprint compatibility on printed circuit boards.