D6FBAU Equivalent & Substitute Parts

Part Overview

The D6FBAU is a 6-position circular connector plug with female sockets manufactured by Switchcraft Inc. in the Q-G® D series. This component is designed for audio and instrumentation applications, featuring solder cup termination and panel mount configuration with a flange. The part is currently listed as obsolete, making identification of suitable alternatives necessary for ongoing system maintenance and new designs requiring compatible components.

Substiute Parts

D6FBAU

Switchcraft Inc.In Stock: 1152D6FBAU Datasheet

Current PartRFQ

D6FBXAU

Switchcraft Inc.In Stock: 807D6FBXAU Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D6FBAU is determined by strict equivalence across the following critical parameters:

• Connector type and gender (Plug, Female Sockets)
• Position count (6 positions)
• Shell size designation (XLR)
• Mounting configuration (Panel Mount with Flange)
• Termination method (Solder Cup)
• Fastening mechanism (Latch Lock)
• Electrical ratings (7.5A current, 125VAC voltage)
• Material specifications (Stainless Steel shell, Phosphor Bronze contacts, Gold mating finish, Polyester insert)
• Orientation (Keyed)
• Feature set (Ground pin included)

The D6FBXAU meets all these criteria and is classified as a direct substitute for the D6FBAU.

Parameter Comparison

Engineering Selection Recommendations

The D6FBXAU is the direct equivalent substitute for the D6FBAU. Both components share identical electrical, mechanical, and material specifications across all critical parameters. The primary distinction is product status and regulatory compliance: the D6FBAU is obsolete, while the D6FBXAU is active and ROHS3 compliant. For new designs and ongoing applications, the D6FBXAU is the appropriate selection. The D6FBXAU is available in bulk packaging with 733 units in stock, compared to the D6FBAU's 1097 units in original packaging.

Frequently Asked Questions (FAQ)

Q: Can the D6FBXAU directly replace the D6FBAU in existing assemblies?

A: Yes. The D6FBXAU is electrically and mechanically equivalent to the D6FBAU across all specified parameters, including connector type, position count, shell size, mounting configuration, termination method, electrical ratings, and material composition.

Q: What is the difference between the D6FBAU and D6FBXAU?

A: The components are functionally identical. The D6FBAU is obsolete, while the D6FBXAU is an active product. The D6FBXAU is ROHS3 compliant, whereas the D6FBAU is RoHS non-compliant. Packaging differs: D6FBAU is supplied in standard packaging, while D6FBXAU is supplied in bulk.

Q: Are there any compatibility concerns when substituting the D6FBXAU for the D6FBAU?

A: No compatibility concerns exist. Both parts maintain identical specifications for connector interface, pin configuration, electrical performance, and mechanical mounting.

Q: What packaging options are available for the substitute part?

A: The D6FBXAU is available in bulk packaging with current inventory of 733 units.

Q: Does the D6FBXAU meet current regulatory requirements?

A: Yes. The D6FBXAU is ROHS3 compliant and REACH unaffected, meeting current regulatory standards for electronic components.