D6C10 LFS Equivalent & Substitute Parts

Part Overview

The D6C10 LFS is a pushbutton switch manufactured by C&K, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a keyswitch design for through-hole mounting. This component is rated for 0.1A at 32V DC and features tactile feedback with a gray square button actuator. The D6C10 LFS is currently listed as obsolete product status, making identification of equivalent substitute parts essential for ongoing design support and procurement continuity.

Substiute Parts

D6C10 LFS

C&KIn Stock: 1006D6C10 LFS Datasheet

Current PartRFQ

D6C10 F1 LFS

C&KIn Stock: 956D6C10 F1 LFS Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the D6C10 LFS is determined by strict equivalence across the following critical parameters:

• Circuit configuration: SPST-NO
• Switch function: Off-Mom (momentary operation)
• Current rating: 100mA DC
• Voltage rating: 32V DC
• Mounting type: Through Hole
• Keyswitch type with square button actuator
• Termination style: PC Pin
• Operating temperature range: -20°C to 85°C
• Electrical life: 250,000 cycles
• Tactile feedback feature

The D6C10 F1 LFS qualifies as a direct substitute based on complete alignment with all electrical and mechanical parameters. The primary distinction is product status: D6C10 F1 LFS is active, whereas D6C10 LFS is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The D6C10 F1 LFS is the direct equivalent substitute for the obsolete D6C10 LFS. Both components share identical electrical specifications, mechanical design, and performance characteristics. The D6C10 F1 LFS carries active product status with ROHS3 compliance, providing improved regulatory alignment compared to the obsolete original part. Both components maintain REACH Unaffected status and MSL 1 classification, ensuring compatibility with standard manufacturing and storage conditions. Selection of D6C10 F1 LFS eliminates obsolescence risk while maintaining full functional and physical compatibility with existing designs.

Frequently Asked Questions (FAQ)

Q: Can D6C10 F1 LFS be used as a direct replacement for D6C10 LFS in existing designs?

A: Yes. The D6C10 F1 LFS is electrically and mechanically identical to D6C10 LFS across all specified parameters, including circuit configuration, current and voltage ratings, mounting type, actuator design, and operating temperature range. Direct substitution is supported without design modification.

Q: What is the primary difference between D6C10 LFS and D6C10 F1 LFS?

A: The primary difference is product status. D6C10 LFS is obsolete, while D6C10 F1 LFS is active. Additionally, D6C10 F1 LFS carries ROHS3 compliance versus RoHS Compliant for the original part. All electrical and mechanical specifications remain identical.

Q: Are there packaging differences between these parts?

A: D6C10 LFS is supplied without specified packaging designation, while D6C10 F1 LFS is supplied in Tray packaging. Both components use identical PC Pin termination and through-hole mounting configuration.

Q: What certifications and compliance standards apply to both parts?

A: Both D6C10 LFS and D6C10 F1 LFS are RoHS compliant (D6C10 F1 LFS specifically ROHS3), REACH Unaffected, and classified as MSL 1 (Unlimited moisture sensitivity level). Both carry ECCN EAR99 classification and HTSUS code 8536.50.9031.

Q: Is the D6C10 F1 LFS suitable for applications requiring 250,000 cycle electrical life?

A: Yes. The D6C10 F1 LFS is rated for 250,000 electrical cycles, identical to the D6C10 LFS specification, and includes tactile feedback feature for both parts.