D6264-46 Equivalent & Substitute Parts

Part Overview

The D6264-46 is a 64-position DIP/DIL header connector with slotted tin contacts manufactured by Harwin Inc. This connector is designed for through-hole mounting applications requiring a dual-row configuration with 0.100" pitch spacing. The product is currently obsolete, making identification of compatible substitute parts essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

D6264-46

Harwin Inc.In Stock: 968D6264-46 Datasheet

Current PartRFQ

160-10-964-00-001000

Mill-Max Manufacturing Corp.In Stock: 1032160-10-964-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D6264-46 is determined by strict equivalence across the following critical parameters:

• Connector Type: Must be DIP/DIL header format
• Position Count: Exactly 64 positions required
• Pitch Specification: 0.100" (2.54mm) pitch mandatory
• Row Configuration: Dual-row layout with 0.900" (22.86mm) row spacing
• Mounting & Termination: Through-hole solder termination
• Contact Configuration: Slotted contact design
• Compliance: ROHS3 compliance and MSL 1 rating

The substitute part 160-10-964-00-001000 from Mill-Max Manufacturing Corp. meets all these critical parameters. The primary difference is the contact finish material: the substitute uses gold plating (10.0µin / 0.25µm) compared to the original tin finish (137.8µin / 4.60µm). Both finishes are compatible with standard PCB soldering processes and provide equivalent electrical performance for this connector category.

Parameter Comparison

Engineering Selection Recommendations

The 160-10-964-00-001000 substitute part is suitable for applications requiring D6264-46 replacement. Both parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions. The substitute part carries active product status, providing assured availability for current and future procurement cycles.

The contact finish difference (gold versus tin) does not affect mechanical fit or electrical compatibility in standard through-hole soldering applications. Both finishes are suitable for PCB assembly processes and provide equivalent contact reliability for this connector category.

Frequently Asked Questions (FAQ)

Q: Can the 160-10-964-00-001000 be used as a direct replacement for the D6264-46?

A: Yes. Both connectors share identical mechanical dimensions, pitch specifications, row configuration, and mounting requirements. The connector will fit existing PCB footprints and mounting hardware without modification.

Q: What is the difference between tin and gold contact finishes?

A: Tin and gold are both standard contact finish materials for through-hole connectors. Gold provides enhanced corrosion resistance and contact reliability in high-reliability applications. Tin is a cost-effective finish suitable for standard industrial applications. Both finishes are compatible with standard soldering processes.

Q: Are both parts RoHS compliant?

A: Yes. Both the D6264-46 and 160-10-964-00-001000 are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the packaging format for the substitute part?

A: The 160-10-964-00-001000 is supplied in tube packaging. The original D6264-46 packaging format is not specified in the available data.

Q: Is the substitute part currently available?

A: Yes. The 160-10-964-00-001000 carries active product status with 975 pieces in stock. The original D6264-46 is obsolete.