D6228-01 Equivalent & Substitute Parts

Part Overview

The D6228-01 is a 28-position DIP/DIL header connector with slotted tin contact finish, manufactured by Harwin Inc. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement. The part features through-hole solder termination with 0.100" (2.54mm) pitch and dual-row configuration, standard for legacy DIP applications.

Substiute Parts

D6228-01

Harwin Inc.In Stock: 981D6228-01 Datasheet

Current PartRFQ

160-90-628-00-001000

Mill-Max Manufacturing Corp.In Stock: 1039160-90-628-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The 160-90-628-00-001000 from Mill-Max Manufacturing Corp. qualifies as a direct substitute based on the following critical parameters:

• Identical connector type (DIP, DIL - Header)
• Matching position count (28 positions)
• Identical pitch specification (0.100" / 2.54mm)
• Matching row configuration (2 rows, 0.600" spacing)
• Identical contact type (Slotted)
• Matching mounting and termination methods (Through Hole, Solder)

The substitute maintains mechanical and electrical compatibility through these core dimensional and functional parameters. Contact finish differs (Tin-Lead vs. Tin) and contact finish thickness varies, but both finishes are acceptable for standard through-hole solder applications.

Parameter Comparison

Engineering Selection Recommendations

The 160-90-628-00-001000 is the primary substitute for the obsolete D6228-01. Selection is based on:

• Product status: The substitute is active and currently manufactured, ensuring long-term availability and supply chain continuity.
• Compliance alignment: Both parts share identical RoHS non-compliance and MSL ratings, maintaining consistent compliance posture in legacy designs.
• Mechanical compatibility: All critical dimensional parameters (pitch, row spacing, position count) are identical, ensuring direct PCB footprint compatibility.
• Contact finish: The Tin-Lead finish of the substitute provides equivalent solderability and electrical performance for through-hole applications.

Frequently Asked Questions (FAQ)

Q: Can the 160-90-628-00-001000 be used as a direct replacement for the D6228-01?

A: Yes. The substitute maintains identical connector type, position count, pitch, row configuration, contact type, and mounting method. PCB footprint and electrical performance are compatible.

Q: What is the difference between Tin and Tin-Lead contact finishes?

A: Both finishes provide adequate solderability and electrical conductivity for through-hole solder termination. Tin-Lead finish offers slightly thicker plating (200.0µin vs. 137.8µin), providing additional corrosion resistance in standard operating environments.

Q: Are there packaging differences between these parts?

A: The D6228-01 packaging is not specified in available data. The 160-90-628-00-001000 is supplied in tube packaging. Confirm packaging requirements with your procurement process.

Q: Do both parts have the same RoHS compliance status?

A: Yes. Both the D6228-01 and 160-90-628-00-001000 are RoHS non-compliant. If RoHS compliance is required for your application, alternative connector families must be evaluated.

Q: What is the MSL rating for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity. Standard storage and handling practices apply.