D6224-46 Equivalent & Substitute Parts

Part Overview

The D6224-46 is a 24-position DIP/DIL header connector with slotted tin contacts manufactured by Harwin Inc. This connector is classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations. The part features through-hole solder termination and is designed for applications requiring dual-row header connectivity with 0.100" pitch spacing.

Substiute Parts

D6224-46

Harwin Inc.In Stock: 742D6224-46 Datasheet

Current PartRFQ

160-10-624-00-001000

Mill-Max Manufacturing Corp.In Stock: 883160-10-624-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D6224-46 is determined by strict equivalence across the following critical parameters:

• Connector type classification (DIP/DIL header)
• Position count (24 positions)
• Row configuration (2 rows)
• Pitch specification (0.100"/2.54mm)
• Row spacing (0.600"/15.24mm)
• Contact type (slotted configuration)
• Mounting method (through-hole)
• Termination process (solder)

The 160-10-624-00-001000 from Mill-Max Manufacturing Corp. satisfies all mandatory substitution criteria. The primary distinction between these parts is the contact finish material: the D6224-46 uses tin plating, while the substitute employs gold plating. Both parts maintain identical mechanical and electrical interface specifications, RoHS3 compliance, and MSL ratings.

Parameter Comparison

Engineering Selection Recommendations

The 160-10-624-00-001000 is the designated manufacturer-recommended substitute for the D6224-46. Both components maintain full mechanical and electrical interface compatibility across all critical parameters. The substitute part carries active product status, ensuring continued availability and supply chain reliability compared to the obsolete D6224-46.

Both parts satisfy ROHS3 compliance requirements and carry identical MSL ratings, supporting deployment in moisture-sensitive applications without additional handling protocols. The gold contact finish of the substitute provides enhanced corrosion resistance compared to the tin finish of the original part, which may offer improved long-term reliability in certain environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can the 160-10-624-00-001000 be used as a direct replacement for the D6224-46?

A: Yes. Both parts share identical mechanical dimensions, pitch specifications, row configurations, and electrical interface parameters. The parts are mechanically and electrically interchangeable.

Q: What is the difference between tin and gold contact finishes?

A: Tin and gold are both acceptable contact finish materials for slotted header connectors. Gold provides superior corrosion resistance and is typically preferred for applications requiring extended service life or exposure to corrosive environments. Tin is a cost-effective alternative suitable for standard applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the D6224-46 and 160-10-624-00-001000 are ROHS3 compliant and carry identical MSL ratings of 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Why is the D6224-46 listed as obsolete?

A: The D6224-46 has been discontinued by Harwin Inc. The 160-10-624-00-001000 is the active equivalent from Mill-Max Manufacturing Corp., ensuring continued component availability for new designs and system support.

Q: Are there packaging differences between these parts?

A: The D6224-46 packaging specification is not provided in the technical data. The 160-10-624-00-001000 is supplied in tube packaging. Confirm packaging requirements with your procurement department.