D6206-01 Equivalent & Substitute Parts

Part Overview

The D6206-01 is a 6-position DIP/DIL header connector with slotted tin contact finish, manufactured by Harwin Inc. This through-hole rectangular connector is designed for applications requiring dual-row header connectivity with 0.100" (2.54mm) pitch spacing. The part is currently obsolete, making identification of functionally equivalent alternatives essential for ongoing system support, maintenance, and new design implementations where legacy compatibility is required.

Substiute Parts

D6206-01

Harwin Inc.In Stock: 848D6206-01 Datasheet

Current PartRFQ

160-90-306-00-001000

Mill-Max Manufacturing Corp.In Stock: 896160-90-306-00-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D6206-01 is determined by strict equivalence across the following critical parameters:

• Connector Type: Must be DIP/DIL header format
• Position Count: Exactly 6 positions required
• Row Configuration: Dual-row (2 rows) layout mandatory
• Pitch Specification: 0.100" (2.54mm) center-to-center spacing
• Row Spacing: 0.300" (7.62mm) between rows
• Contact Geometry: Slotted contact design
• Mounting Method: Through-hole PCB mounting
• Termination Method: Solder termination

The substitute part 160-90-306-00-001000 from Mill-Max Manufacturing Corp. satisfies all these parameters. While the contact finish differs (tin-lead versus tin), both finishes are compatible with standard solder assembly processes and provide equivalent electrical performance for this connector category.

Parameter Comparison

Engineering Selection Recommendations

The 160-90-306-00-001000 from Mill-Max Manufacturing Corp. is the direct functional equivalent for the obsolete D6206-01. Selection of this substitute is based on:

• Mechanical Compatibility: Identical pitch, row spacing, and mounting footprint ensure direct PCB layout compatibility without redesign
• Electrical Equivalence: Both parts provide identical contact configuration and slotted design for standard wire insertion applications
• Product Availability: The substitute maintains active production status with confirmed inventory, ensuring supply chain continuity
• Compliance Alignment: Both parts share identical RoHS and REACH compliance status, maintaining regulatory consistency in legacy system support
• Contact Finish Compatibility: Tin-lead finish on the substitute is fully compatible with standard solder assembly processes and provides equivalent performance to tin finish in this connector application

Frequently Asked Questions (FAQ)

Q: Can the 160-90-306-00-001000 be used as a direct replacement for D6206-01 without PCB modification?

A: Yes. Both connectors share identical pitch (0.100"), row spacing (0.300"), position count (6), and row configuration (2 rows). The footprint is mechanically and electrically compatible without PCB redesign.

Q: What is the difference between tin and tin-lead contact finishes?

A: Both finishes provide equivalent electrical conductivity and solder compatibility. Tin-lead finish offers slightly higher contact finish thickness (200.0µin versus 137.8µin), which may provide marginal durability benefits in high-cycle insertion applications. Both are suitable for standard solder assembly.

Q: Are there any compliance differences between the original and substitute part?

A: No. Both parts are RoHS non-compliant and REACH unaffected, maintaining identical regulatory status. Both carry EAR99 ECCN classification.

Q: What is the significance of the slotted contact design?

A: Slotted contacts accommodate standard wire gauges for direct insertion without crimping, making these connectors suitable for breadboard prototyping, test fixtures, and applications requiring tool-free assembly.

Q: Why is the original D6206-01 obsolete?

A: Harwin Inc. has discontinued this product line. The Mill-Max 160-90-306-00-001000 remains in active production and provides full functional equivalence for replacement and new design applications.