Omron D5C-1AS0 Equivalent & Substitute Parts

Part Overview

The Omron D5C-1AS0 is a snap action switch rated for 0.2A at 100V AC with panel mount configuration and cable lead termination. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations. The D5C-1AS0 features IP67 ingress protection and mechanical durability rated to 10,000,000 cycles, suitable for industrial control applications requiring sealed switch operation.

Substiute Parts

D5C-1AS0

Omron Automation and SafetyIn Stock: 830D5C-1AS0 Datasheet

Current PartRFQ

D5B-1513

Omron Automation and SafetyIn Stock: 1183D5B-1513 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The D5B-1513 is identified as a substitute based on the following shared electrical and mechanical parameters:

Common Substitution Criteria:

• Manufacturer: Omron Automation and Safety (same manufacturer ensures design compatibility)
• Mounting Type: Panel Mount (identical physical installation method)
• Termination Style: Cable Leads (same connection interface)
• Ingress Protection: IP67 - Dust Tight, Waterproof (equivalent environmental sealing)
• Mechanical Life: 10,000,000 Cycles (identical durability specification)
• RoHS Compliance: Both parts meet RoHS requirements

Electrical Parameter Differences: The D5B-1513 operates at reduced current (30mA DC) and voltage (30V DC) compared to the D5C-1AS0 (200mA AC, 100V AC). This substitution is valid only for applications where the circuit requirements do not exceed the D5B-1513 electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

The D5B-1513 is an active product with current manufacturing support and ROHS3 compliance, providing supply chain continuity for the obsolete D5C-1AS0. Selection of the D5B-1513 requires verification that circuit voltage and current requirements do not exceed 30V DC and 30mA respectively. The D5B-1513 operates at a lower temperature minimum (-10°C versus -25°C), which may be a limiting factor in applications requiring extended cold-temperature operation. Both parts maintain identical mechanical life ratings and IP67 environmental protection, ensuring equivalent durability and sealing performance in sealed enclosure applications.

Frequently Asked Questions (FAQ)

Q: Can the D5B-1513 directly replace the D5C-1AS0 in all applications?

A: No. The D5B-1513 has reduced electrical ratings (30mA DC at 30V DC versus 200mA AC at 100V AC). Substitution is valid only when circuit requirements fall within the D5B-1513 specifications. The D5C-1AS0 operates on AC voltage while the D5B-1513 operates on DC voltage, requiring circuit compatibility verification.

Q: What are the key differences between these two models?

A: Primary differences are electrical ratings (current, voltage, and AC/DC operation), operating temperature minimum (-10°C for D5B-1513 versus -25°C for D5C-1AS0), and product status (D5B-1513 is active; D5C-1AS0 is obsolete). Both share identical mechanical life, IP67 protection, panel mount configuration, and cable lead termination.

Q: Are both parts available in the same packaging?

A: The D5C-1AS0 is available in standard packaging, while the D5B-1513 is supplied in bulk packaging. Both use cable lead termination suitable for panel mount installation.

Q: Do both parts meet current compliance standards?

A: The D5C-1AS0 is RoHS Compliant. The D5B-1513 meets the more recent ROHS3 Compliant standard and is REACH Affected. Both parts carry MSL Rating 1 (Unlimited moisture sensitivity level).

Q: What is the operating force specification for the D5B-1513?

A: The D5B-1513 has an operating force of 5.000gf with a pretravel of 0.551" (14.0mm). The D5C-1AS0 does not specify these parameters in available documentation.