D3372-5002-AR Equivalent & Substitute Parts

Part Overview

The D3372-5002-AR is a rectangular connector header manufactured by 3M, designed for through-hole, right-angle board-to-cable/wire applications. This 60-position connector operates across -55°C to 105°C and features shrouded 4-wall construction with push-pull fastening. The part is Active status and RoHS Compliant, with 769 units currently in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling design flexibility and supply chain alternatives.

Substiute Parts

D3372-5002-AR

3MIn Stock: 840D3372-5002-AR Datasheet

Current PartRFQ

09185646913

HARTINGIn Stock: 117109185646913 Datasheet

MFR RecommendedRFQ

71922-060LF

Amphenol ICC (FCI)In Stock: 101371922-060LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the D3372-5002-AR is determined by the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Material Flammability Rating: UL94 V-0
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitutes maintain these core electrical and mechanical parameters. Variations in position count, fastening mechanism, contact material, and operating temperature range are documented in the comparison table below. These variations do not preclude substitution when application requirements permit.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and comply with RoHS requirements, ensuring long-term availability and regulatory alignment. The D3372-5002-AR and 71922-060LF are direct 60-position equivalents with identical pitch and row spacing. The 09185646913 provides a 64-position alternative with extended operating temperature range (-55°C to 125°C versus -55°C to 105°C) and ROHS3 compliance, suitable for applications requiring higher thermal performance.

Fastening mechanism differs between parts: D3372-5002-AR and 71922-060LF use push-pull fastening, while 09185646913 employs latch lock/eject hooks. Contact material and insulation composition vary across manufacturers but all maintain UL94 V-0 flammability rating and MSL 1 classification. Selection should account for mechanical interface requirements, thermal environment, and connector mating cycle specifications.

Frequently Asked Questions (FAQ)

Q: Can the 09185646913 (64-position) directly replace the D3372-5002-AR (60-position)?

A: The 09185646913 maintains identical pitch (0.100" / 2.54mm), row spacing, mounting type, and shrouding. However, the increased position count requires verification that the mating connector or PCB layout accommodates 64 positions. Fastening mechanism also differs (latch lock versus push-pull). Substitution is feasible only when application design permits the additional positions and fastening change.

Q: What are the key differences between push-pull and latch lock fastening?

A: Push-pull fastening (D3372-5002-AR, 71922-060LF) uses a simple push-to-connect, pull-to-disconnect mechanism. Latch lock/eject hooks (09185646913) provide positive mechanical retention with ejection lever operation. Selection depends on application requirements for connection security and operator interface.

Q: Are all three parts suitable for high-temperature applications?

A: The D3372-5002-AR operates to 105°C, while the 09185646913 extends to 125°C. The 71922-060LF does not specify an upper operating temperature limit in the provided data. For applications exceeding 105°C, the 09185646913 is the specified choice among these alternatives.

Q: Do contact material differences affect electrical performance?

A: All three parts feature gold-plated mating contacts with tin-plated posts, ensuring equivalent electrical conductivity and corrosion resistance. Contact material composition (brass, copper alloy, phosphor bronze) affects mechanical properties and manufacturing characteristics but does not alter electrical performance for standard signal and power applications within the specified current ratings.

Q: What packaging considerations apply to these substitutes?

A: D3372-5002-AR ships in trays, 09185646913 in bulk, and 71922-060LF in tubes. Packaging affects handling, storage, and component placement automation compatibility. Verify packaging compatibility with assembly processes before substitution.

Q: Are these parts interchangeable with the mating connector?

A: These are header connectors (male pins). Interchangeability depends on the corresponding receptacle connector design. Verify that the mating receptacle accommodates the specific header series, position count, and fastening mechanism of the selected substitute.