Harwin D3080-01 Equivalent & Substitute Parts

Part Overview

The Harwin D3080-01 is a 2-position (1 x 2) shunt connector with non-insulated male pins, 0.200" (5.08mm) pitch, and tin contact finish. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing procurement and system maintenance. The D3080-01 belongs to the D308 series of shorting link connectors designed for standard 0.200" grid applications.

Substiute Parts

D3080-01

Harwin Inc.In Stock: 1044D3080-01 Datasheet

Current PartRFQ

D3080-46

Harwin Inc.In Stock: 34861D3080-46 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The D3080-01 has one direct substitute: the D3080-46. Substitution is valid based on the following matching parameters:

• Number of Positions: Both parts are 2 (1 x 2) configuration
• Pitch: Both maintain 0.200" (5.08mm) spacing
• Height: Both are 0.359" (9.13mm)
• Contact Finish: Both use tin plating
• Contact Finish Thickness: Both specify 100.0µin (2.54µm)
• Type: Both are non-insulated shunt connectors
• Gender: Both feature male pins

The primary distinction is product status: D3080-01 is obsolete while D3080-46 is active, and compliance differences exist between the two variants.

Parameter Comparison

Engineering Selection Recommendations

The D3080-46 is the active equivalent for the obsolete D3080-01. Both parts share identical mechanical and electrical specifications for pitch, position count, height, and contact finish parameters. The D3080-46 offers the advantage of active product status with current manufacturing support and improved RoHS3 compliance. For new designs or ongoing procurement where component availability is critical, the D3080-46 is the appropriate selection. Both parts maintain REACH Unaffected status and are suitable for applications requiring non-insulated 2-position shunt connectors on 0.200" grids.

Frequently Asked Questions (FAQ)

Q: Can D3080-46 directly replace D3080-01 in existing assemblies? A: Yes. The D3080-46 matches all critical mechanical parameters: 2-position configuration, 0.200" pitch, 0.359" height, and tin contact finish with identical thickness specification.

Q: What is the primary reason to transition from D3080-01 to D3080-46? A: The D3080-01 is obsolete with no active manufacturing. The D3080-46 is an active product with current inventory and manufacturing support from Harwin Inc.

Q: Are there compliance differences between these parts? A: Yes. The D3080-46 is ROHS3 compliant, while the D3080-01 is RoHS non-compliant. Both maintain REACH Unaffected status.

Q: Does packaging differ between D3080-01 and D3080-46? A: The D3080-01 uses standard packaging while D3080-46 is supplied in bulk packaging. Both are suitable for the same connector grid applications.

Q: Are the electrical and mechanical specifications identical? A: All specified electrical and mechanical parameters are identical: pitch, position count, height, contact finish, and contact finish thickness match exactly between both parts.