Omron D2MV-01-1C2 Equivalent & Substitute Parts

Part Overview

The Omron D2MV-01-1C2 is a snap-action switch with SPDT (Single Pole Double Throw) configuration, rated for 0.1A at 125V AC and 30V DC. This component features a round pin plunger actuator and chassis mount termination with quick connect 0.187" (4.7mm) solder terminals. The D2MV-01-1C2 is classified as obsolete, making identification of active equivalent parts essential for ongoing production and maintenance applications.

Substiute Parts

D2MV-01-1C2

Omron Electronics Inc-EMC DivIn Stock: 1246D2MV-01-1C2 Datasheet

Current PartRFQ

VX-01-1A2

Omron Electronics Inc-EMC DivIn Stock: 78860VX-01-1A2 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Omron VX-01-1A2 qualifies as a direct substitute for the D2MV-01-1C2 based on the following critical parameters:

Electrical Equivalence: Both parts maintain identical circuit configuration (SPDT), switch function (On-Momentary), current rating (100mA AC/DC), and voltage ratings (125V AC / 30V DC).

Mechanical Compatibility: Both employ round pin plunger actuators with chassis mount configuration and identical termination style (Solder, Quick Connect - 0.187" / 4.7mm).

Environmental Specifications: Operating temperature range (-25°C to 80°C), ingress protection (IP40), electrical life (1,000,000 cycles), and mechanical life (10,000,000 cycles) are identical across both parts.

Compliance: Both parts are RoHS compliant with MSL rating of 1 (Unlimited).

Key Differentiators: The VX-01-1A2 is an active product with significantly higher inventory availability (78,768 pcs vs. 1,140 pcs), making it the recommended substitute for the obsolete D2MV-01-1C2.

Parameter Comparison

Engineering Selection Recommendations

The Omron VX-01-1A2 is the direct substitute for the obsolete D2MV-01-1C2. Both parts are manufactured by Omron Electronics Inc-EMC Div and maintain full electrical, mechanical, and environmental specification parity. The VX-01-1A2 carries active product status with substantially higher inventory availability, ensuring supply chain continuity for new designs and production requirements. Both parts maintain identical RoHS compliance and MSL ratings, supporting equivalent reliability and environmental standards in end-use applications.

Frequently Asked Questions (FAQ)

Q: Can the VX-01-1A2 be used as a direct replacement for the D2MV-01-1C2?

A: Yes. The VX-01-1A2 is electrically and mechanically equivalent to the D2MV-01-1C2. Both parts share identical circuit configuration, voltage and current ratings, actuator type, mounting configuration, and termination style. The VX-01-1A2 is the active equivalent of the obsolete D2MV-01-1C2.

Q: What are the key electrical specifications that define substitution compatibility?

A: Substitution compatibility is determined by SPDT circuit configuration, 100mA current rating (AC/DC), 125V AC and 30V DC voltage ratings, and On-Momentary switch function. Both the D2MV-01-1C2 and VX-01-1A2 meet these specifications identically.

Q: Are there packaging differences between these parts?

A: The D2MV-01-1C2 is supplied in standard packaging, while the VX-01-1A2 is supplied in Tray packaging. Both employ identical termination style (Solder, Quick Connect - 0.187" / 4.7mm) and mounting configuration (Chassis Mount).

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both the D2MV-01-1C2 and VX-01-1A2 are RoHS compliant, carry MSL rating 1 (Unlimited), operate across -25°C to 80°C, and maintain IP40 ingress protection. Electrical and mechanical life specifications are identical at 1,000,000 and 10,000,000 cycles respectively.

Q: Why is the VX-01-1A2 recommended over the D2MV-01-1C2?

A: The VX-01-1A2 is classified as an active product with significantly higher inventory availability (78,768 pcs vs. 1,140 pcs), while the D2MV-01-1C2 is obsolete. For new production and ongoing applications, the VX-01-1A2 ensures supply chain reliability and long-term component availability.