D25P24B6GV00 D-Sub Connector Equivalent & Substitute Parts

Part Overview

The D25P24B6GV00 is a 25-position D-Sub plug connector with male pins, manufactured by Amphenol ICC (FCI) in the Delta D series. This through-hole solder termination connector is designed for applications requiring robust signal connectivity with board-level mounting. The part is currently active in production with 992 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector family, allowing for component interchangeability in design and procurement scenarios.

Substiute Parts

D25P24B6GV00

Amphenol ICC (FCI)In Stock: 1015D25P24B6GV00 Datasheet

Current PartRFQ

D25P24B6GV00LF

Amphenol ICC (FCI)In Stock: 1308D25P24B6GV00LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for D-Sub connectors is determined by strict equivalence across electrical and mechanical parameters. The D25P24B6GV00 and its identified substitute maintain identical specifications in the following critical areas:

• Connector configuration: 25-position D-Sub plug with male pins
• Shell size and layout: Size 3 (DB, B)
• Electrical performance: 5A current rating, 300V voltage rating
• Termination: Solder attachment to printed circuit boards
• Environmental performance: -55°C to 125°C operating range, UL94 V-0 flammability rating
• Contact system: Phosphor bronze with gold plating (30.0µin thickness)
• Mechanical features: Board lock and grounding indents
• Mounting: Through-hole configuration with female screwlock (4-40) at mating interface

Variations in shell finish material (tin plated versus tin-nickel plated) and RoHS compliance status do not affect functional interchangeability when electrical and mechanical parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

Both the D25P24B6GV00 and D25P24B6GV00LF are active production parts suitable for new designs and replacement applications. Selection between these parts should be based on regulatory and compliance requirements specific to the end application.

The D25P24B6GV00LF offers RoHS compliance and REACH unaffected status, making it the appropriate choice for applications subject to European Union environmental directives or customer specifications requiring RoHS certification. The tin-nickel plated shell finish provides enhanced corrosion resistance compared to tin plating.

The D25P24B6GV00 remains available for applications where RoHS compliance is not a requirement. Both parts maintain identical electrical performance, mechanical compatibility, and environmental operating specifications.

Frequently Asked Questions (FAQ)

Q: Are D25P24B6GV00 and D25P24B6GV00LF mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications including shell size (3/DB-B), pin count (25), mounting configuration (through-hole), and flange design (female screwlock 4-40). They are directly interchangeable at the board level.

Q: What is the difference between the tin-plated and tin-nickel plated shell finishes?

A: The shell material finish differs between the two parts. D25P24B6GV00 uses steel with tin plating, while D25P24B6GV00LF uses steel with tin-nickel plating. Tin-nickel plating provides improved corrosion resistance and is typically specified for applications with higher environmental demands or extended storage periods.

Q: Does RoHS compliance affect electrical performance?

A: No. RoHS compliance status reflects manufacturing process and material sourcing requirements, not electrical or mechanical performance. Both parts deliver identical current rating (5A per contact), voltage rating (300V), and contact system specifications.

Q: Can these connectors be used in applications requiring -55°C to 125°C operation?

A: Yes. Both D25P24B6GV00 and D25P24B6GV00LF are rated for continuous operation across the -55°C to 125°C temperature range with no performance degradation.

Q: What termination method is used for these connectors?

A: Both parts use solder termination for direct attachment to printed circuit board pads. No crimping or other secondary assembly operations are required.

Q: Are these connectors suitable for signal-only applications?

A: Yes. Both connectors are classified as signal contact type and are designed for signal transmission applications. The 5A per contact current rating supports moderate power distribution if required by the application design.