D09S82C6GL00 Equivalent & Substitute Parts

Part Overview

The D09S82C6GL00 is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the Delta D series. This connector features female sockets, right-angle mounting, and press-fit termination for board edge through-hole applications. The part is classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for new designs and production continuity.

Substiute Parts

D09S82C6GL00

Amphenol ICC (FCI)In Stock: 725D09S82C6GL00 Datasheet

Current PartRFQ

D09S82C6GL00LF

Amphenol ICC (FCI)In Stock: 1140D09S82C6GL00LF Datasheet

DirectRFQ

3-1393481-6

TE Connectivity AMP ConnectorsIn Stock: 10513-1393481-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the D09S82C6GL00 is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Connector style: D-Sub
• Connector type: Receptacle, Female Sockets
• Number of positions: 9
• Number of rows: 2
• Shell size and layout: 1 (DE, E)
• Mounting type: Board Edge, Through Hole, Right Angle
• Termination method: Press-Fit
• Contact finish: Gold
• Operating temperature range: -55°C ~ 125°C

Allowable Variations:

• Shell material finish: Steel with Tin or Tin-Nickel plating
• Current rating: Equal to or greater than 5A per contact
• Voltage rating: Equal to or greater than 300V
• Product status: Active preferred for new designs
• RoHS compliance: Compliant status preferred

The D09S82C6GL00LF (Amphenol ICC) qualifies as a direct substitute with identical electrical and mechanical specifications and active product status. The 3-1393481-6 (TE Connectivity) is identified as a manufacturer-recommended alternative; however, it exhibits parameter deviations in backset spacing (0.411" vs. 0.256"), current rating (2.2A vs. 5A), and flange feature design that require engineering evaluation for specific applications.

Parameter Comparison

Engineering Selection Recommendations

D09S82C6GL00LF (Amphenol ICC): This part is the primary equivalent substitute. It maintains identical electrical and mechanical specifications to the obsolete D09S82C6GL00 while offering active product status and RoHS compliance. The transition from tin plating to tin-nickel plating on the shell provides enhanced corrosion resistance. This substitute is suitable for direct replacement in new designs and production continuity without design modification.

3-1393481-6 (TE Connectivity): This part is identified as a manufacturer-recommended alternative but contains material deviations. The reduced current rating (2.2A versus 5A) and increased backset spacing (0.411" versus 0.256") indicate different mechanical and electrical design parameters. The absence of specified voltage rating and undefined REACH status require additional engineering assessment. This part is applicable only where application requirements align with its reduced current capacity and modified mechanical footprint.

Frequently Asked Questions (FAQ)

Q: Can D09S82C6GL00LF be used as a direct replacement for D09S82C6GL00?

A: Yes. The D09S82C6GL00LF maintains identical connector style, position count, shell size, mounting configuration, termination method, and operating temperature range. The shell finish upgrade from tin to tin-nickel plating and RoHS compliance status represent improvements over the obsolete original part.

Q: What is the significance of the backset spacing difference in the 3-1393481-6?

A: Backset spacing (0.411" versus 0.256") defines the distance from the connector mounting surface to the contact plane. The increased spacing in the 3-1393481-6 indicates a different mechanical design that may not accommodate existing PCB layouts designed for the original 0.256" spacing. Board redesign may be required.

Q: Why is the current rating lower for the 3-1393481-6?

A: The 3-1393481-6 is rated at 2.2A per contact compared to 5A for the original part. This reflects different contact geometry and material specifications within the AMPLIMITE HD-20 series. Applications requiring the full 5A rating per contact cannot use this substitute without circuit redesign.

Q: Are there packaging differences between these parts?

A: The D09S82C6GL00 and D09S82C6GL00LF differ in packaging format. The D09S82C6GL00LF is supplied in trays, which may affect procurement, handling, and assembly processes compared to the original packaging specification.

Q: Which substitute is recommended for new product designs?

A: The D09S82C6GL00LF is recommended for new designs. It provides active product status, RoHS compliance, and identical electrical and mechanical performance to the obsolete original part without design modification requirements.

Q: What compliance certifications apply to these parts?

A: All three parts carry UL94 V-0 material flammability rating and EAR99 export classification. The D09S82C6GL00LF and 3-1393481-6 are RoHS compliant. The D09S82C6GL00LF includes REACH Unaffected status; the 3-1393481-6 shows Vendor Undefined REACH status.