Request Quote
(Ships tomorrow)
D09S13A4UX00LF Equivalent & Substitute Parts
Part Overview
The D09S13A4UX00LF is a 9-position D-Sub receptacle connector manufactured by Amphenol ICC (FCI) in the Delta D series. This right-angle, through-hole solder connector features female sockets with tin-plated steel shell and gold-flashed phosphor bronze contacts. The connector is rated for 5A at 300V and operates across -55°C to 125°C. Currently in active production status with 1108 units in stock, this component serves as a standard D-Sub interface in electronic assemblies. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical dimensions, and termination compatibility.
Substiute Parts
Key Parameters
| Parameter | D09S13A4UX00LF |
|---|---|
| Connector Type | Receptacle, Female Sockets |
| Number of Positions | 9 |
| Shell Size | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 300V |
| Operating Temperature | -55°C to 125°C |
| Shell Material/Finish | Steel, Tin Plated |
| Contact Finish | Gold (Flash) |
| Backset Spacing | 0.409" (10.40mm) |
| Flange Feature | Housing/Shell (4-40) |
| RoHS Status | RoHS Compliant |
Substitute Part Grouping Explanation
Substitution eligibility is determined by the following critical parameters:
- Connector Configuration: 9-position D-Sub receptacle with female sockets
- Shell Size & Layout: Size 1 (DE, E) configuration
- Mounting Method: Through-hole, right-angle orientation
- Termination Type: Solder connection
- Electrical Ratings: Current capacity (minimum 5A) and voltage rating (minimum 300V)
- Operating Temperature Range: -55°C to 125°C minimum
- Mechanical Compatibility: Backset spacing tolerance and flange mounting interface
- Compliance: RoHS compliance status
Substitute parts must maintain compatibility across these parameters. Variations in contact material, shell finish, dielectric material, and packaging format are acceptable provided electrical and mechanical specifications remain within acceptable tolerances.
Parameter Comparison
| Parameter | D09S13A4UX00LF (Main) | 09641147232 | 09661126603 | 09661526613 | 09661527613 | 09661536613 | 1-106505-2 | 1-1393480-7 | 106505-2 | 2-106505-2 | 3-106505-2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC (FCI) | HARTING | HARTING | HARTING | HARTING | HARTING | TE Connectivity | TE Connectivity | TE Connectivity | TE Connectivity | TE Connectivity |
| Connector Type | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets | Receptacle, Female Sockets |
| Number of Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Shell Size | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle | Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle | Panel Mount, Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (Amps) | 5A | 7.5A | 6.5A | 6.5A | 6.5A | 6.5A | 6A | — | 6A | 6A | 6A |
| Voltage Rating | 300V | 100V | — | — | — | — | 125V | — | 125V | 125V | 125V |
| Operating Temperature | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C | -55°C to 105°C | — | -55°C to 105°C | -55°C to 105°C | -55°C to 105°C |
| Shell Material/Finish | Steel, Tin Plated | Steel | Steel | Steel | Steel | Steel | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated |
| Contact Finish | Gold (Flash) | — | — | — | — | — | Gold | Gold | Gold | Gold | Gold |
| Backset Spacing | 0.409" (10.40mm) | 0.401" (10.20mm) | 0.409" (10.40mm) | 0.409" (10.40mm) | 0.409" (10.40mm) | 0.409" (10.40mm) | 0.406" (10.30mm) | 0.371" (9.43mm) | 0.406" (10.30mm) | 0.406" (10.30mm) | 0.406" (10.30mm) |
| Flange Feature | Housing/Shell (4-40) | Housing/Shell (4-40) | Mating Side, Female Screwlock (4-40) | Mating Side, Female Screwlock (4-40) | Mating Side, Female Screwlock (4-40) | Mating Side, Female Screwlock (4-40) | Housing/Shell (4-40) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) | Housing/Shell (M3) | Mating Side, Female Screwlock (4-40) |
| RoHS Status | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Inventory (Pcs) | 1108 | 908 | 909 | 802 | 2715 | 720 | 1990 | 1151 | 1881 | 1074 | 1139 |
Engineering Selection Recommendations
Primary Substitutes (Highest Compatibility)
The TE Connectivity AMPLIMITE HD-20 series parts (1-106505-2, 106505-2, 2-106505-2, 3-106505-2) provide direct functional equivalence. These connectors maintain 9-position D-Sub configuration, through-hole right-angle mounting, and solder termination. All are ROHS3 compliant with active product status. Current ratings of 6A exceed the 5A requirement. Operating temperature range of -55°C to 105°C covers the primary operating window, though the upper limit is 20°C lower than the main part. Voltage ratings of 125V are lower than the 300V specification; applications requiring the full 300V rating should not use these substitutes.
Secondary Substitutes (Conditional Compatibility)
HARTING 09661126603, 09661526613, 09661527613, and 09661536613 maintain the 9-position D-Sub receptacle configuration with matching shell size and right-angle through-hole mounting. Current ratings of 6.5A exceed the 5A requirement. Backset spacing of 0.409" matches the main part exactly. These parts feature stamped contacts and PBT dielectric material. Voltage rating information is not provided; applications requiring 300V operation should not use these substitutes without voltage specification confirmation.
Limited Compatibility
HARTING 09641147232 provides 9-position D-Sub receptacle configuration with 7.5A current rating. Backset spacing of 0.401" represents a 0.008" deviation from the main part specification. Voltage rating of 100V is significantly lower than the 300V requirement. This part is suitable only for applications with reduced voltage requirements.
TE Connectivity 1-1393480-7 exhibits reduced backset spacing of 0.371" (9.43mm), representing a 0.038" deviation from specification. Current rating and voltage rating are not provided. This part should be evaluated only for applications where dimensional tolerance is not critical.
Compliance Considerations
All substitute parts maintain RoHS compliance status (RoHS Compliant or ROHS3 Compliant). TE Connectivity parts carry REACH Affected or Vendor Undefined status; applications subject to REACH requirements should confirm compliance with specific regulatory obligations.
Frequently Asked Questions (FAQ)
Q: Can I use a substitute part with a lower voltage rating than the main part?
A: No. The D09S13A4UX00LF is rated for 300V operation. Substitute parts with lower voltage ratings (such as HARTING 09641147232 at 100V or TE Connectivity AMPLIMITE HD-20 series at 125V) are not suitable for applications requiring the full 300V rating. Voltage rating determines the maximum potential difference the connector can safely withstand. Using an undersized connector creates electrical safety risk.
Q: What is the significance of backset spacing differences?
A: Backset spacing defines the distance from the connector mounting face to the contact plane. The main part specifies 0.409" (10.40mm). Substitute parts with matching spacing (HARTING series at 0.409") ensure direct mechanical compatibility with existing PCB layouts and mating connectors. Parts with different spacing (TE Connectivity at 0.406" or 1-1393480-7 at 0.371") may require PCB redesign or cause mating misalignment. Verify PCB design tolerance before selecting substitutes with spacing variations.
Q: Are there differences in contact material between the main part and substitutes?
A: Yes. The main part uses phosphor bronze contacts with gold flash finish. HARTING substitutes use copper alloy contacts with unspecified finish. TE Connectivity substitutes use phosphor bronze contacts with gold finish (30.0µin thickness). Contact material affects electrical conductivity, corrosion resistance, and long-term reliability. Phosphor bronze with gold plating provides superior performance in high-reliability applications. Copper alloy contacts are acceptable for general-purpose applications with lower environmental stress.
Q: What is the difference between Housing/Shell and Mating Side flange features?
A: Housing/Shell flange features (4-40 threaded) mount on the connector body rear, securing the connector to the PCB or panel. Mating Side Female Screwlock features mount on the connector front, providing cable-side strain relief and mating security. The main part uses Housing/Shell mounting. HARTING substitutes use Mating Side Female Screwlock. These are mechanically different mounting interfaces. Verify your application's mounting requirement before selecting a substitute with a different flange configuration.
Q: Can I use a substitute with a higher current rating?
A: Yes. The main part is rated for 5A. All substitute parts meet or exceed this requirement (6A to 7.5A). Higher current ratings indicate the connector can safely handle greater current loads without thermal degradation. Using a connector with higher current capacity does not create compatibility issues; it provides additional safety margin.
Q: What does ROHS3 Compliant mean compared to RoHS Compliant?
A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 refers to the third iteration of the RoHS directive with updated substance restrictions. RoHS Compliant typically refers to earlier directive versions. Both are acceptable for most applications. Verify specific regulatory requirements for your end-use application, particularly if subject to EU or equivalent environmental regulations.
Q: Are packaging differences (Tray vs. Bulk) significant for substitution?
A: Packaging format affects handling, storage, and logistics but does not impact electrical or mechanical performance. Tray packaging provides individual compartments for component protection during shipment and storage. Bulk packaging reduces packaging material and cost. Select based on your procurement and assembly process requirements, not on functional compatibility.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts