D09P82C4GL00 D-Sub Connector Equivalent & Substitute Parts

Part Overview

The D09P82C4GL00 is a 9-position D-Sub plug connector with right-angle, press-fit termination manufactured by Amphenol ICC (FCI) in the Delta D series. This connector is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and system maintenance. The part features male pins, board edge mounting, and is designed for signal applications with a 5A current rating per contact.

Substiute Parts

D09P82C4GL00

Amphenol ICC (FCI)In Stock: 874D09P82C4GL00 Datasheet

Current PartRFQ

D09P82C4GL00LF

Amphenol ICC (FCI)In Stock: 2200D09P82C4GL00LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the D09P82C4GL00 is based on strict equivalence across the following critical parameters:

• Connector style, type, and pin configuration (D-Sub plug, 9-position, male pins)
• Physical form factor and mounting interface (board edge, through hole, right angle)
• Electrical performance specifications (5A current rating, 300V voltage rating, operating temperature -55°C to 125°C)
• Termination method (press-fit)
• Shell size and connector layout (1 / DE, E)
• Material composition and flammability compliance (steel shell, UL94 V-0)

The substitute part D09P82C4GL00LF maintains full compatibility across all these parameters while offering improved compliance status and packaging options.

Parameter Comparison

Engineering Selection Recommendations

The D09P82C4GL00LF is the direct active equivalent for the obsolete D09P82C4GL00. Selection of the substitute part is justified on the following grounds:

Product Status: The D09P82C4GL00 is classified as obsolete, whereas D09P82C4GL00LF maintains active product status with established supply chain availability.

Regulatory Compliance: D09P82C4GL00LF achieves RoHS compliance, addressing regulatory requirements for new designs and procurement cycles. The original part is RoHS non-compliant.

Shell Finish Enhancement: The substitute part features tin-nickel plating compared to tin plating on the original, providing improved corrosion resistance and contact durability.

Packaging and Availability: D09P82C4GL00LF is supplied in tray packaging with significantly higher inventory levels (2100 pcs vs. 788 pcs), supporting production continuity and cost efficiency.

All electrical, mechanical, and thermal specifications remain equivalent between the two parts, ensuring direct functional interchangeability in existing circuit designs and PCB layouts.

Frequently Asked Questions (FAQ)

Q: Are D09P82C4GL00 and D09P82C4GL00LF mechanically interchangeable?

A: Yes. Both parts share identical connector geometry, pin configuration (9-position), mounting interface (board edge, through hole, right angle), and backset spacing (0.256" / 6.50mm). PCB layouts and mechanical assemblies designed for the original part accommodate the substitute without modification.

Q: What is the difference in shell plating between these parts?

A: The D09P82C4GL00 features tin plating on the steel shell, while D09P82C4GL00LF uses tin-nickel plating. Tin-nickel plating provides enhanced corrosion resistance and improved contact wear characteristics, particularly in environments with elevated humidity or corrosive atmospheres.

Q: Does the RoHS compliance difference affect electrical performance?

A: No. RoHS compliance relates to material composition restrictions (lead, cadmium, mercury, etc.) and does not alter electrical performance. Both parts maintain identical current ratings (5A), voltage ratings (300V), and operating temperature ranges (-55°C to 125°C).

Q: Can I use D09P82C4GL00LF as a direct replacement in existing assemblies?

A: Yes. The substitute part is functionally and mechanically equivalent. No circuit redesign, PCB layout modification, or assembly procedure changes are required. The part is a direct drop-in replacement.

Q: What packaging format is supplied for each part?

A: D09P82C4GL00 is supplied in bulk packaging, while D09P82C4GL00LF is supplied in tray packaging. Tray packaging provides improved component protection during storage and handling, and is standard for active production parts.

Q: Are there any temperature or electrical rating differences?

A: No. Both parts operate across the identical temperature range (-55°C to 125°C) and maintain the same current (5A) and voltage (300V) ratings. Contact material (phosphor bronze) and dielectric material (PBT) are identical.