Request Quote
(Ships tomorrow)
D09P24B4PL00LF Equivalent & Substitute Parts
Part Overview
The D09P24B4PL00LF is a 9-position D-Sub plug connector manufactured by Amphenol ICC (FCI) in the Delta D series. This through-hole solder termination connector features male pins with a DE/E shell size (1) and is designed for signal applications requiring 5A current capacity at 300V. The connector is RoHS compliant and rated for operating temperatures from -55°C to 125°C.
Substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative sourcing improves lead times or cost efficiency, or when design requirements allow for functionally equivalent alternatives that meet the same electrical and mechanical specifications.
Substiute Parts
Key Parameters
| Parameter | D09P24B4PL00LF |
|---|---|
| Connector Type | D-Sub Plug, Male Pins |
| Number of Positions | 9 |
| Shell Size, Connector Layout | 1 (DE, E) |
| Mounting Type | Through Hole |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 300V |
| Operating Temperature Range | -55°C to 125°C |
| Shell Material, Finish | Steel, Tin Plated |
| Contact Finish | Gold (Flash) |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | RoHS Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility is determined by strict alignment with the following core parameters:
- Connector Type & Configuration: Must be D-Sub plug with male pins, 9 positions, shell size 1 (DE/E)
- Mounting & Termination: Must support through-hole solder termination
- Electrical Performance: Current rating must meet or exceed 5A; voltage rating must meet or exceed 300V
- Environmental Compliance: Must maintain UL94 V-0 flammability rating and support -55°C to 125°C operating range
- Contact & Shell Materials: Gold-plated contacts and tin-plated steel shell ensure compatibility with the original specification
Substitute parts are grouped into two categories:
Category A - Direct Vertical Mount Equivalents (09651616713, 1-338309-2, 1-747871-4, 1-747871-6, 2-338309-2, 2-748003-0, 208006-1): These maintain the vertical through-hole solder mount configuration with equivalent or superior electrical ratings.
Category B - Panel Mount Variants (172-009-112R001, 172-E09-113R011, 172-E09-113R911): These provide panel mount capability in addition to through-hole mounting, suitable for applications requiring front-panel accessibility.
Parameter Comparison
| Parameter | D09P24B4PL00LF | 09651616713 | 1-338309-2 | 1-747871-4 | 1-747871-6 | 2-338309-2 | 2-748003-0 | 208006-1 | 172-009-112R001 | 172-E09-113R011 | 172-E09-113R911 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | HARTING | TE Connectivity | TE Connectivity | TE Connectivity | TE Connectivity | TE Connectivity | TE Connectivity | NorComp Inc. | NorComp Inc. | NorComp Inc. |
| Connector Type | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins | D-Sub Plug, Male Pins |
| Number of Positions | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 | 9 |
| Shell Size, Connector Layout | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) | 1 (DE, E) |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Through Hole | Panel Mount, Through Hole | Panel Mount, Through Hole | Panel Mount, Through Hole |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (Amps) | 5A | 6.5A | 6A | 6A | 6A | 6A | 6A | 6A | 5A | 5A | 5A |
| Voltage Rating | 300V | — | — | 125V | 125V | — | 125V | 125V | — | — | — |
| Operating Temperature Range | -55°C to 125°C | -55°C to 125°C | -55°C to 105°C | -55°C to 105°C | -55°C to 105°C | -55°C to 105°C | -55°C to 105°C | -55°C to 105°C | -50°C to 100°C | -50°C to 100°C | -50°C to 100°C |
| Shell Material, Finish | Steel, Tin Plated | Steel | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | — | Steel, Tin Plated | Steel, Nickel Plated | Steel, Nickel Plated |
| Contact Finish | Gold (Flash) | — | Gold | Gold | Gold | Gold | Gold | Gold (Flash) | Gold (Flash) | Gold (Flash) | Gold (Flash) |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| RoHS Status | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS non-compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS non-compliant | RoHS non-compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | Not Applicable | Not Applicable | Not Applicable |
| Product Status | Active | Active | Active | Active | Active | Active | Active | Active | Obsolete | Active | Active |
Engineering Selection Recommendations
For RoHS-Compliant Applications: Select from 09651616713 (HARTING), 1-338309-2, 1-747871-6, 2-338309-2, 172-009-112R001, 172-E09-113R011, or 172-E09-113R911. These parts maintain ROHS3 compliance matching or exceeding the original specification.
For Extended Temperature Range (-55°C to 125°C): The original D09P24B4PL00LF and HARTING 09651616713 are the only options that support the full temperature range. All TE Connectivity and NorComp alternatives are limited to -55°C to 105°C or -50°C to 100°C respectively.
For 300V Voltage Rating: Only the original D09P24B4PL00LF specifies 300V. Substitute parts either specify 125V or do not provide voltage rating data. Applications requiring 300V operation must use the original part.
For Active Product Status: Avoid 172-009-112R001 (obsolete). All other substitutes maintain active product status.
For Vertical Through-Hole Mount Only: Use Category A substitutes (09651616713, 1-338309-2, 1-747871-4, 1-747871-6, 2-338309-2, 2-748003-0, 208006-1). Category B parts (NorComp 172 series) add panel mount capability, which may introduce mechanical incompatibility in designs requiring vertical-only mounting.
For Superior Current Rating: HARTING 09651616713 provides 6.5A, exceeding the original 5A specification. All other substitutes provide 6A.
Frequently Asked Questions (FAQ)
Q: Can I use a substitute part with a lower operating temperature maximum than the original?
A: No. The original D09P24B4PL00LF operates to 125°C. Substitutes limited to 105°C or 100°C are not equivalent for applications requiring the full temperature range. Verify your application's maximum operating temperature before selecting a substitute.
Q: Are all substitute parts RoHS compliant?
A: No. Parts 1-747871-4, 2-748003-0, and 208006-1 are RoHS non-compliant. If RoHS compliance is required, select from 09651616713, 1-338309-2, 1-747871-6, 2-338309-2, 172-009-112R001, 172-E09-113R011, or 172-E09-113R911.
Q: What is the difference between vertical mount and panel mount D-Sub connectors?
A: Vertical mount connectors (Category A) are designed for through-hole PCB mounting with the connector body perpendicular to the board. Panel mount connectors (Category B, NorComp 172 series) include a flange for mounting to an enclosure front panel. Panel mount variants may not fit designs requiring vertical-only mounting.
Q: Does the substitute part need to have the same voltage rating as the original?
A: The substitute must meet or exceed the application's voltage requirement. The original D09P24B4PL00LF is rated 300V. Most substitutes specify 125V or provide no voltage rating. For applications requiring 300V operation, the original part is the only qualified option.
Q: Can I substitute a part with higher current rating?
A: Yes. A substitute with higher current rating (6A or 6.5A versus 5A) is electrically compatible and provides additional margin. The connector can safely handle the original circuit's current draw.
Q: What does "gold flash" contact finish mean?
A: Gold flash is a thin electroplated gold layer applied over a base metal (typically nickel or copper). Flash thickness provides corrosion resistance and low contact resistance while minimizing material cost. It is equivalent to standard gold plating for signal-level applications.
Q: Are NorComp 172 series parts suitable for new designs?
A: The 172-009-112R001 is obsolete and should not be used in new designs. The 172-E09-113R011 and 172-E09-113R911 are active but operate at reduced temperature range (-50°C to 100°C) compared to the original specification (-55°C to 125°C).
Q: What is the significance of the flange feature designation?
A: The flange feature indicates the mounting interface. "Housing/Shell (M3)" or "(4-40)" indicates threaded mounting points. "Mating Side, Female Screwlock" indicates locking features on the mating connector interface. "Board Side" indicates mounting to the PCB. Different flange features affect mechanical compatibility with mating connectors and enclosure mounting.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts