D09P24A4PL00 Equivalent & Substitute Parts

Part Overview

The D09P24A4PL00 is a 9-position D-Sub plug connector with male pins, manufactured by Amphenol ICC (FCI) as part of the Delta D series. This connector is designed for through-hole solder termination applications requiring signal-level connectivity with a 5A current rating per contact. The part is currently active in production and maintains an inventory of 906 pieces in new original condition. Finding equivalent and substitute parts is necessary to ensure supply chain continuity, accommodate design revisions, or address specific compliance requirements such as RoHS status.

Substiute Parts

D09P24A4PL00

Amphenol ICC (FCI)In Stock: 1014D09P24A4PL00 Datasheet

Current PartRFQ

D09P24A4PL00LF

Amphenol ICC (FCI)In Stock: 1203D09P24A4PL00LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the D09P24A4PL00 is determined by strict equivalence across the following critical parameters:

• Connector type and pin configuration (9-position D-Sub plug, male pins)
• Shell size and layout (Size 1, DE/E configuration)
• Electrical ratings (5A per contact, 300V)
• Termination method (solder)
• Operating temperature range (-55°C ~ 125°C)
• Material specifications (Phosphor Bronze contacts, PBT dielectric, UL94 V-0)
• Mechanical compatibility (through-hole mounting, M3 housing/shell flange)

The D09P24A4PL00LF qualifies as a direct substitute based on full alignment with these parameters. Variations in shell finish (tin plated versus tin-nickel plated) and RoHS compliance status do not affect functional or mechanical interchangeability within the same application context.

Parameter Comparison

Engineering Selection Recommendations

The D09P24A4PL00LF serves as a direct functional and mechanical substitute for the D09P24A4PL00. Both parts maintain identical electrical performance, mechanical compatibility, and thermal operating specifications. The primary distinction is RoHS compliance status: the D09P24A4PL00LF is RoHS compliant, while the D09P24A4PL00 is RoHS non-compliant. Additionally, the D09P24A4PL00LF features a tin-nickel plated shell finish compared to the tin-plated finish of the original part, which provides enhanced corrosion resistance without affecting electrical or mechanical function.

Selection between these parts should be based on regulatory requirements and environmental specifications applicable to the end application. Applications requiring RoHS compliance mandate use of the D09P24A4PL00LF. Both parts carry UL94 V-0 flammability certification and are suitable for industrial and commercial applications within the specified temperature and voltage ranges.

Frequently Asked Questions (FAQ)

Q: Can the D09P24A4PL00LF be used as a direct replacement for the D09P24A4PL00 in existing designs?

A: Yes. Both connectors are mechanically and electrically identical in form, fit, and function. The D09P24A4PL00LF can be substituted without design modifications or PCB layout changes.

Q: What is the difference between tin-plated and tin-nickel plated shell finishes?

A: Tin-nickel plating provides superior corrosion resistance and environmental durability compared to tin plating alone. Both finishes maintain equivalent electrical conductivity and mechanical performance for this connector series.

Q: Does RoHS compliance affect the connector's electrical or mechanical performance?

A: No. RoHS compliance is a regulatory and material composition requirement, not a performance specification. The D09P24A4PL00LF meets identical electrical and mechanical standards as the D09P24A4PL00.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both the D09P24A4PL00 and D09P24A4PL00LF operate across the identical temperature range of -55°C to 125°C.

Q: What is the current rating per contact for these connectors?

A: Both connectors are rated for 5A per contact at 300V, supporting signal-level applications with standard current requirements.

Q: Are there any packaging or inventory differences between these parts?

A: Both parts are supplied in tray packaging. The D09P24A4PL00LF currently maintains higher inventory availability (1095 pieces) compared to the D09P24A4PL00 (906 pieces).