D09P13A4PL00LF 9-Position D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The D09P13A4PL00LF is a 9-position D-Sub plug connector manufactured by Amphenol ICC (FCI) in the Delta D series. This right-angle, through-hole solder connector is designed for signal applications with male pins and a 2-row configuration in shell size 1 (DE, E). The part is active in production with 1026 units in current inventory.

Substitute parts are necessary when the primary part becomes unavailable, when alternative manufacturers are preferred for supply chain diversification, or when specific flange features or electrical ratings better suit application requirements.

Key Parameters

Parameter	D09P13A4PL00LF
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A per Contact
Voltage Rating	300V
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the D09P13A4PL00LF is determined by the following core parameters:

9-position, 2-row D-Sub plug configuration in shell size 1 (DE, E)
Male pin connector type with right-angle, through-hole solder termination
Signal contact type with UL94 V-0 flammability rating
Operating temperature range of -55°C to 125°C
RoHS compliance status

Substitute parts must maintain these core electrical and mechanical specifications. Variations in current rating, voltage rating, backset spacing, flange feature design, contact finish, and shell material finish are permitted within the allowed parameter ranges for this product category. Parts with different current ratings (3A, 5A, or 6.5A), voltage ratings (125V, 250V, or 300V), or backset spacing (0.318", 0.405", 0.406", 0.409", or 0.454") remain functionally compatible as long as the application requirements do not exceed the substitute part's electrical limits.

Parameter Comparison

Parameter	D09P13A4PL00LF	09651626817	09651627817	5745434-8	FCE17E09PB440	L717SDE09P1ACH	L717SDE09P1ACH3R	L717SDE09P1ACH4R	L717SDE09PA4CH3F	L717SDE09PA4CH3R	L717SDE09PA4CH4F
Manufacturer	Amphenol ICC (FCI)	HARTING	HARTING	TE Connectivity	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9	9	9
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	6.5A	6.5A	6A	5A	3A	3A	3A	3A	3A	3A
Voltage Rating	300V	—	—	125V	—	250V	250V	250V	250V	250V	250V
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 105°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS non-compliant
Backset Spacing	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.454" (11.53mm)	0.405" (10.29mm)	0.406" (10.30mm)	0.406" (10.30mm)	0.406" (10.30mm)	0.318" (8.08mm)	0.318" (8.08mm)	0.318" (8.08mm)

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility)

The HARTING parts 09651626817 and 09651627817 maintain the identical backset spacing (0.409"), shell size, and mounting configuration as the D09P13A4PL00LF. Both are ROHS3 compliant and rated for higher current (6.5A) with the same operating temperature range. These parts are suitable for direct substitution in applications where the higher current rating does not create thermal or design conflicts.

Secondary Substitutes (Electrical Rating Variations)

The TE Connectivity 5745434-8 (AMPLIMITE HDP-20 series) provides a 6A current rating and maintains RoHS compliance. However, the backset spacing differs at 0.454" and the operating temperature maximum is reduced to 105°C. This part is suitable only for applications where the reduced temperature range and different backset spacing do not conflict with PCB layout or thermal requirements.

The Amphenol ICC FCE17E09PB440 (FCE17 series) maintains the 5A current rating and RoHS compliance but operates at a reduced temperature range (-40°C to 85°C) and has a different backset spacing (0.405"). This part is suitable for commercial-grade applications within the specified temperature limits.

Tertiary Substitutes (Lower Current Rating)

The Amphenol ICC SD series parts (L717SDE09P1ACH, L717SDE09P1ACH3R, L717SDE09P1ACH4R, L717SDE09PA4CH3F, L717SDE09PA4CH3R, L717SDE09PA4CH4F) are rated for 3A per contact, which is lower than the primary part's 5A rating. These parts maintain the full -55°C to 125°C operating temperature range and are suitable only for applications where the current requirement does not exceed 3A per contact. RoHS compliance varies within this series; L717SDE09P1ACH and L717SDE09PA4CH4F are RoHS non-compliant, while L717SDE09P1ACH3R, L717SDE09P1ACH4R, and L717SDE09PA4CH3R are RoHS compliant or ROHS3 compliant.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating than the original D09P13A4PL00LF?

A: Substitution with lower current-rated parts (3A instead of 5A) is permitted only if your application's actual current draw per contact does not exceed the substitute part's rating. Exceeding the rated current will result in connector degradation and potential circuit failure.

Q: What is the significance of different backset spacing values?

A: Backset spacing determines the distance from the connector's mounting surface to the contact insertion point. Parts with different backset spacing (0.318", 0.405", 0.406", 0.409", or 0.454") may require PCB layout adjustments. Verify that your PCB design accommodates the substitute part's backset spacing before implementation.

Q: Are HARTING parts 09651626817 and 09651627817 truly equivalent to the D09P13A4PL00LF?

A: These HARTING parts maintain the same shell size, position count, mounting type, and backset spacing as the D09P13A4PL00LF. The primary differences are the manufacturer, higher current rating (6.5A vs. 5A), and different flange feature design. They are functionally compatible for applications within their electrical specifications.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances directive. ROHS3 Compliant indicates compliance with the updated RoHS 3 directive (2015/863/EU), which includes additional restricted substances. If your application requires ROHS3 compliance, select parts explicitly marked as ROHS3 Compliant.

Q: Can I substitute the D09P13A4PL00LF with the TE Connectivity 5745434-8 if my application operates at 110°C?

A: No. The TE Connectivity 5745434-8 has a maximum operating temperature of 105°C. Operating at 110°C exceeds the part's rated temperature range and will compromise reliability. Use only the D09P13A4PL00LF or substitute parts rated for at least 110°C.

Q: What packaging differences exist among these substitute parts?

A: The D09P13A4PL00LF and most Amphenol ICC parts are supplied in Tray packaging. HARTING parts (09651626817, 09651627817) and TE Connectivity 5745434-8 are supplied in Bulk packaging. Verify that your procurement and handling processes accommodate the packaging format of your selected substitute.

Q: Are the SD series parts (L717SDE09...) suitable for high-current applications?

A: No. The SD series parts are rated for 3A per contact, which is significantly lower than the D09P13A4PL00LF's 5A rating. These parts are suitable only for signal-level or low-current applications. For applications requiring 5A or higher current capacity, use the primary part or HARTING/TE Connectivity substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message