CZP2AFTTD600P Ferrite Bead Equivalent & Substitute Parts

Part Overview

The CZP2AFTTD600P is a 60 Ohms @ 100 MHz power line ferrite bead manufactured by KOA Speer Electronics, Inc. in 0805 (2012 Metric) surface mount package. This component is rated for 3A maximum current with 40mOhm DC resistance and operates across -55°C to 125°C. The part is Active status and ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching or closely aligned electrical and mechanical parameters. Alternative components may be required due to inventory availability, supply chain considerations, or design flexibility within specified parameter tolerances.

Substiute Parts

CZP2AFTTD600P

KOA Speer Electronics, Inc.In Stock: 4343CZP2AFTTD600P Datasheet

Current PartRFQ

2508056007Y3

Fair-Rite Products Corp.In Stock: 363502508056007Y3 Datasheet

Parametric EquivalentRFQ

BBPY00201209600Y00

Pulse ElectronicsIn Stock: 49112BBPY00201209600Y00 Datasheet

Parametric EquivalentRFQ

BBPY00201209700Y00

Pulse ElectronicsIn Stock: 24136BBPY00201209700Y00 Datasheet

Parametric EquivalentRFQ

FBH201209T-500Y-S

Cal-Chip Electronics, Inc.In Stock: 40738FBH201209T-500Y-S Datasheet

Parametric EquivalentRFQ

FBH201209T-520Y-S

Cal-Chip Electronics, Inc.In Stock: 41043FBH201209T-520Y-S Datasheet

Parametric EquivalentRFQ

FBH201209T-600Y-S

Cal-Chip Electronics, Inc.In Stock: 41061FBH201209T-600Y-S Datasheet

Parametric EquivalentRFQ

ILHB0805ER600V

Vishay DaleIn Stock: 4615ILHB0805ER600V Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

• Impedance @ 100 MHz: Primary electrical specification. Exact match (60 Ohms) or near-equivalent values (50-70 Ohms) within application tolerance
• Current Rating: Must support minimum 3A
• DC Resistance: Maximum 40mOhm for power line applications; lower values (30mOhm) are acceptable
• Package / Case: 0805 (2012 Metric) surface mount only
• Operating Temperature Range: Must cover -55°C to 125°C minimum
• RoHS Compliance: ROHS3 or equivalent compliance required
• Moisture Sensitivity: MSL 1 (Unlimited) preferred

Substitute parts are grouped into two categories: exact electrical matches (60 Ohms @ 100 MHz) and near-equivalent alternatives (50-70 Ohms @ 100 MHz) that maintain functional compatibility within standard design margins.

Parameter Comparison

Engineering Selection Recommendations

Exact Electrical Match (60 Ohms @ 100 MHz):

2508056007Y3 (Fair-Rite Products Corp.), BBPY00201209600Y00 (Pulse Electronics), FBH201209T-600Y-S (Cal-Chip Electronics, Inc.), and ILHB0805ER600V (Vishay Dale) provide direct electrical equivalence to the CZP2AFTTD600P. All maintain 60 Ohms impedance, 3A current rating, and -55°C to 125°C operating range. ROHS3 compliance is maintained across Fair-Rite, Pulse Electronics, and Vishay Dale options. Cal-Chip FBH201209T-600Y-S carries RoHS Compliant status. Packaging format varies: most are supplied in Tape & Reel (TR), while ILHB0805ER600V is available in Cut Tape (CT) & Digi-Reel®.

Near-Equivalent Alternatives (50-70 Ohms @ 100 MHz):

BBPY00201209700Y00 (70 Ohms), FBH201209T-520Y-S (52 Ohms), and FBH201209T-500Y-S (50 Ohms) provide impedance values within ±17% of the primary specification. These alternatives maintain 3A current rating and full operating temperature range. All are Active status components with appropriate compliance certifications. Selection of near-equivalent impedance values depends on circuit design margin and application-specific EMI filtering requirements.

Compliance and Availability:

All substitute parts are Active status. ROHS3 compliance is confirmed for Fair-Rite, Pulse Electronics, and Vishay Dale. Cal-Chip Electronics parts carry RoHS Compliant designation. Moisture Sensitivity Level 1 (Unlimited) is standard across all options. Inventory availability ranges from 4,600 to 49,011 pieces across substitute options.

Frequently Asked Questions (FAQ)

Q: Can BBPY00201209700Y00 (70 Ohms) be used as a direct replacement for CZP2AFTTD600P (60 Ohms)?

A: BBPY00201209700Y00 is a near-equivalent alternative with 70 Ohms impedance at 100 MHz, representing a +17% deviation from the 60 Ohms specification. Substitution is valid only if circuit design tolerates this impedance variation. Current rating (3A), operating temperature (-55°C to 125°C), package (0805), and compliance (ROHS3) are fully compatible.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel (TR) is standard reel packaging for automated assembly. Cut Tape (CT) & Digi-Reel® (ILHB0805ER600V) provides alternative packaging format. Both are surface mount compatible in 0805 package. Selection depends on assembly equipment and procurement workflow requirements.

Q: Are Cal-Chip FBH series parts (50, 52, 60 Ohms) suitable substitutes?

A: FBH201209T-600Y-S provides exact electrical match (60 Ohms). FBH201209T-520Y-S (52 Ohms) and FBH201209T-500Y-S (50 Ohms) are near-equivalent alternatives. All three maintain 3A current rating, 0805 package, and -55°C to 125°C operating range. Cal-Chip parts carry RoHS Compliant status. DCR values are 30mOhm (lower than CZP2AFTTD600P at 40mOhm), which is acceptable for power line applications.

Q: Does ILHB0805ER600V from Vishay Dale provide equivalent performance?

A: ILHB0805ER600V matches the CZP2AFTTD600P in impedance (60 Ohms @ 100 MHz), current rating (3A), operating temperature (-55°C to 125°C), and package (0805). DCR is 30mOhm versus 40mOhm on the original part. ROHS3 compliance and MSL 1 (Unlimited) are confirmed. Packaging is Cut Tape (CT) & Digi-Reel® rather than Tape & Reel (TR).

Q: Which substitute offers the lowest DC resistance?

A: BBPY00201209600Y00 (Pulse Electronics), FBH201209T-520Y-S, FBH201209T-500Y-S (Cal-Chip Electronics), and ILHB0805ER600V (Vishay Dale) all provide 30mOhm DCR, compared to 40mOhm on the CZP2AFTTD600P. Lower DCR reduces power dissipation and heat generation in power line applications.