CZP2AFTTD102P Equivalent & Substitute Parts

Part Overview

The CZP2AFTTD102P is a 1 kOhms @ 100 MHz power line ferrite bead manufactured by KOA Speer Electronics, Inc. in 0805 (2012 Metric) surface mount package. This component is rated for 1A maximum current with 200mOhm DC resistance and operates across -55°C to 125°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Ferrite beads serve critical functions in power distribution and signal integrity applications, making equivalent substitutes necessary for supply chain flexibility, inventory optimization, and design redundancy.

Substiute Parts

CZP2AFTTD102P

KOA Speer Electronics, Inc.In Stock: 4700CZP2AFTTD102P Datasheet

Current PartRFQ

FBH201209T-102Y-S-H

Cal-Chip Electronics, Inc.In Stock: 100705FBH201209T-102Y-S-H Datasheet

Parametric EquivalentRFQ

MPZ2012S102AT000

TDK CorporationIn Stock: 215828MPZ2012S102AT000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CZP2AFTTD102P is determined by strict equivalence across the following parameters:

• Impedance @ Frequency: 1 kOhms @ 100 MHz (exact match required)
• Filter Type: Power Line (exact match required)
• Number of Lines: 1 (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Surface Mount (exact match required)

Substitute parts may exceed the main part specifications in Current Rating (Max) and DC Resistance (DCR) (Max), provided they do not fall below the original ratings. All identified substitutes meet these criteria and maintain compatibility with existing PCB layouts and assembly processes.

Parameter Comparison

Engineering Selection Recommendations

Both FBH201209T-102Y-S-H (Cal-Chip Electronics) and MPZ2012S102AT000 (TDK Corporation) are parametric equivalents to the CZP2AFTTD102P. Selection between these substitutes should be based on the following factors:

Cal-Chip FBH201209T-102Y-S-H: Offers improved current handling (1.5A vs. 1A) and reduced DC resistance (150mOhm vs. 200mOhm). Maintains RoHS compliance with unlimited MSL rating. Packaged in Tape & Reel format with 100,686 units in stock.

TDK MPZ2012S102AT000: Provides identical performance improvements to the Cal-Chip substitute with 1.5A current rating and 150mOhm DC resistance. Maintains ROHS3 compliance and unlimited MSL rating. Available in Cut Tape and Digi-Reel packaging with 215,810 units in stock. Shares identical ECCN and HTSUS classification with the original part.

Both substitutes maintain Active product status and full regulatory compliance. The choice between them depends on packaging preference, supply availability, and established supplier relationships.

Frequently Asked Questions (FAQ)

Q: Can FBH201209T-102Y-S-H or MPZ2012S102AT000 be used as direct replacements for CZP2AFTTD102P?

A: Yes. Both parts are parametric equivalents with identical impedance (1 kOhms @ 100 MHz), package (0805 2012 Metric), operating temperature range (-55°C ~ 125°C), and filter type (Power Line). They are pin-compatible and footprint-compatible with no PCB modifications required.

Q: What are the advantages of using substitute parts?

A: The substitute parts offer improved electrical performance with higher current ratings (1.5A vs. 1A) and lower DC resistance (150mOhm vs. 200mOhm), reducing heat dissipation and improving efficiency in power line applications. Both maintain full regulatory compliance and unlimited moisture sensitivity ratings.

Q: Are there any dimensional differences between the main part and substitutes?

A: Minor dimensional variations exist. The CZP2AFTTD102P has a maximum height of 0.043" (1.10mm) compared to 0.041" (1.05mm) for both substitutes. Width dimensions vary slightly (0.047" vs. 0.049"). These differences remain within standard 0805 package tolerances and do not affect PCB assembly or functionality.

Q: Do all parts meet the same regulatory requirements?

A: All three parts maintain RoHS compliance, REACH Unaffected status, and unlimited MSL ratings. The CZP2AFTTD102P and MPZ2012S102AT000 are ROHS3 compliant, while the FBH201209T-102Y-S-H is RoHS compliant. All share EAR99 ECCN classification.

Q: What packaging options are available for substitutes?

A: The Cal-Chip FBH201209T-102Y-S-H is supplied in Tape & Reel format. The TDK MPZ2012S102AT000 is available in Cut Tape and Digi-Reel packaging. Selection depends on assembly line requirements and inventory management preferences.