CZP1JFTTD600P Equivalent & Substitute Parts

Part Overview

The CZP1JFTTD600P is a 0603 (1608 Metric) surface mount ferrite bead manufactured by KOA Speer Electronics, Inc. This power line ferrite bead operates at 60 Ohms impedance @ 100 MHz with a maximum current rating of 3A and 40mOhm DC resistance. The component is designed for electromagnetic interference (EMI) suppression in power distribution circuits. With active product status and ROHS3 compliance, equivalent and substitute parts are available from multiple manufacturers to support design flexibility, inventory optimization, and supply chain continuity.

Key Parameters

Parameter	Value
Impedance @ Frequency	60 Ohms @ 100 MHz
Current Rating (Max)	3A
DC Resistance (DCR) (Max)	40mOhm
Package / Case	0603 (1608 Metric)
Operating Temperature	-55°C ~ 125°C
Mounting Type	Surface Mount
Filter Type	Power Line
Number of Lines	1
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the CZP1JFTTD600P is determined by the following critical parameters:

Impedance @ Frequency: 60 Ohms @ 100 MHz (exact match required for direct substitution)
Current Rating (Max): 3A minimum (equal or higher acceptable)
DC Resistance (DCR) (Max): 40mOhm maximum (lower values acceptable)
Package / Case: 0603 (1608 Metric) (exact match required)
Operating Temperature: -55°C ~ 125°C (equal or wider range acceptable)
Mounting Type: Surface Mount (exact match required)
Number of Lines: 1 (exact match required)

Substitute parts are grouped into two categories:

Category A - Direct Parametric Equivalents (60 Ohms @ 100 MHz, 3A, 40mOhm DCR): Parts that match all critical electrical and mechanical parameters. These include HCB05-600-RC, MH1608-600T, BBPY00160808600Y00, 2506036007Y3, and MH1608-600Y.

Category B - Parametric Variants (Impedance or Current Rating Deviation): Parts that deviate from one or more critical parameters. FBH160808T-500Y-S operates at 50 Ohms @ 100 MHz. FBH160808T-700Y-S operates at 70 Ohms @ 100 MHz. FBU160808T-600Y-S maintains 60 Ohms @ 100 MHz but supports 4A current rating with 30mOhm DCR. These variants are suitable only when application requirements permit the specified deviations.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Impedance @ 100 MHz	Current Rating (Max)	DCR (Max)	Package	Filter Type	RoHS Status	Inventory (Pcs)
CZP1JFTTD600P	KOA Speer Electronics, Inc.	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Power Line	ROHS3 Compliant	3,878
2506036007Y3	Fair-Rite Products Corp.	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Signal Line	ROHS3 Compliant	232,100
742792602	Würth Elektronik	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Signal Line	ROHS3 Compliant	100,400
BBPY00160808600Y00	Pulse Electronics	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Not specified	ROHS3 Compliant	178,989
FBH160808T-500Y-S	Cal-Chip Electronics, Inc.	50 Ohms	3A	40mOhm	0603 (1608 Metric)	Power Line	RoHS Compliant	41,102
FBH160808T-700Y-S	Cal-Chip Electronics, Inc.	70 Ohms	3A	40mOhm	0603 (1608 Metric)	Power Line	RoHS Compliant	40,651
FBU160808T-600Y-S	Cal-Chip Electronics, Inc.	60 Ohms	4A	30mOhm	0603 (1608 Metric)	Power Line	RoHS Compliant	21,001
HCB05-600-RC	Allied Components International	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Power Line	RoHS Compliant	4,663
MH1608-600T	Bourns Inc.	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Power, Signal Line	ROHS3 Compliant	4,205
MH1608-600Y	Bourns Inc.	60 Ohms	3A	40mOhm	0603 (1608 Metric)	Power, Signal Line	ROHS3 Compliant	29,496

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical and Mechanical Parameters)

The following parts are direct substitutes for the CZP1JFTTD600P and maintain all critical specifications:

2506036007Y3 (Fair-Rite Products Corp.): Matches all electrical parameters. ROHS3 compliant. Highest inventory availability (232,100 pcs). Designated as signal line filter type.
742792602 (Würth Elektronik, WE-CBF series): Matches all electrical parameters. ROHS3 compliant. High inventory availability (100,400 pcs). Designated as signal line filter type.
BBPY00160808600Y00 (Pulse Electronics, BBPY series): Matches all electrical parameters. ROHS3 compliant. High inventory availability (178,989 pcs).
MH1608-600T (Bourns Inc., MH series): Matches all electrical parameters. ROHS3 compliant. Supports both power and signal line applications.
MH1608-600Y (Bourns Inc., MH series): Matches all electrical parameters. ROHS3 compliant. Supports both power and signal line applications. Available in Cut Tape & Digi-Reel packaging.
HCB05-600-RC (Allied Components International): Matches all electrical parameters. RoHS compliant. Lower inventory availability (4,663 pcs).

Parametric Variants (Conditional Substitution)

The following parts deviate from critical parameters and are suitable only when application requirements permit:

FBU160808T-600Y-S (Cal-Chip Electronics, Inc., FBU series): Maintains 60 Ohms @ 100 MHz impedance. Supports higher current rating (4A vs. 3A). Provides lower DCR (30mOhm vs. 40mOhm). Suitable for applications requiring enhanced current capacity or lower insertion loss.
FBH160808T-500Y-S (Cal-Chip Electronics, Inc., FBH series): Operates at 50 Ohms @ 100 MHz (10 Ohm reduction). Maintains 3A current rating and 40mOhm DCR. Suitable only when 50 Ohm impedance is acceptable.
FBH160808T-700Y-S (Cal-Chip Electronics, Inc., FBH series): Operates at 70 Ohms @ 100 MHz (10 Ohm increase). Maintains 3A current rating and 40mOhm DCR. Suitable only when 70 Ohm impedance is acceptable.

All substitute parts maintain the 0603 (1608 Metric) package, surface mount configuration, -55°C ~ 125°C operating temperature range, and MSL 1 moisture sensitivity level. RoHS compliance is confirmed for all listed parts.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with different impedance (50 Ohms or 70 Ohms) in place of the 60 Ohm CZP1JFTTD600P?

A: Impedance is a critical parameter for ferrite bead performance in EMI suppression circuits. Substitution with different impedance values (FBH160808T-500Y-S at 50 Ohms or FBH160808T-700Y-S at 70 Ohms) is only permissible if your circuit design and EMI filtering requirements explicitly allow for the specified impedance deviation. Direct substitution requires matching the 60 Ohm specification.

Q: What is the difference between power line and signal line ferrite beads?

A: Filter type designation indicates the intended application context. Power line ferrite beads are optimized for power distribution circuits, while signal line ferrite beads are optimized for signal integrity applications. The CZP1JFTTD600P is designated as a power line filter. Direct substitutes include both power line (HCB05-600-RC, MH1608-600T, MH1608-600Y) and signal line (2506036007Y3, 742792602) variants. Electrical parameters remain equivalent; application suitability should be confirmed with circuit requirements.

Q: Can I use FBU160808T-600Y-S as a substitute if it has lower DCR (30mOhm vs. 40mOhm)?

A: Yes. Lower DCR is a beneficial parameter that reduces insertion loss and heat dissipation. FBU160808T-600Y-S maintains the 60 Ohm impedance and supports higher current (4A vs. 3A), making it a suitable upgrade substitute when your application can accommodate these enhanced specifications.

Q: Are all substitute parts RoHS compliant?

A: All listed substitute parts are RoHS compliant. The CZP1JFTTD600P and direct equivalents (2506036007Y3, 742792602, BBPY00160808600Y00, MH1608-600T, MH1608-600Y) are ROHS3 compliant. Parametric variants (FBH160808T-500Y-S, FBH160808T-700Y-S, FBU160808T-600Y-S, HCB05-600-RC) are RoHS compliant. Compliance status is suitable for applications requiring RoHS certification.

Q: What packaging options are available for substitute parts?

A: The CZP1JFTTD600P is supplied in Tape & Reel (TR) packaging. Most direct substitutes are also available in Tape & Reel. MH1608-600Y is available in Cut Tape (CT) & Digi-Reel® packaging. Packaging selection should align with your assembly process requirements and inventory management practices.

Q: Which substitute part has the highest inventory availability?

A: 2506036007Y3 (Fair-Rite Products Corp.) has the highest inventory availability at 232,100 pcs, followed by BBPY00160808600Y00 (Pulse Electronics) at 178,989 pcs and 742792602 (Würth Elektronik) at 100,400 pcs. These options support rapid procurement and supply chain continuity.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message