CX-411B-P-C05 Equivalent & Substitute Parts

Part Overview

The CX-411B-P-C05 is a through-beam optical sensor manufactured by Panasonic Industrial Automation Sales, designed for 10-meter (32.80 feet) detection range applications. This sensor features PNP open collector output with dark-ON logic, operates on 12V to 24V supply voltage, and is housed in an IP67-rated enclosure with a 50cm cable connection. The product is currently obsolete, making identification of compatible substitute parts essential for system maintenance and component replacement in existing installations.

Substiute Parts

CX-411B-P-C05

Panasonic Industrial Automation SalesIn Stock: 1230CX-411B-P-C05 Datasheet

Current PartRFQ

CX-411-P

Panasonic Industrial Automation SalesIn Stock: 1097CX-411-P Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CX-411B-P-C05 is determined by strict alignment of the following critical parameters:

• Sensing Method: Through-Beam detection capability
• Sensing Distance: 10-meter (32.80 feet) range
• Voltage Supply Range: 12V to 24V operation
• Output Configuration: PNP open collector logic
• Light Source: Red LED
• Response Time: 1ms
• Ingress Protection: IP67 rating
• Operating Temperature Range: -25°C to 55°C
• Series Compatibility: CX-400 series

The CX-411-P qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. Both sensors share the same base product number (CX-411), series designation, and functional specifications. The primary distinction is product status: CX-411B-P-C05 is obsolete while CX-411-P is active, and packaging differs (CX-411-P is supplied in Box format).

Parameter Comparison

Engineering Selection Recommendations

The CX-411-P is the appropriate substitute for the obsolete CX-411B-P-C05. Both components maintain identical electrical specifications, sensing performance, and environmental ratings. The CX-411-P carries active product status with ROHS3 compliance certification, ensuring availability and regulatory alignment for new procurements and system replacements.

Selection of CX-411-P over CX-411B-P-C05 is justified by:

• Active product status enabling continued supply chain support
• Enhanced RoHS3 compliance versus RoHS compliance
• Identical functional and electrical parameters
• Same series and base product number designation
• Equivalent sensing distance, response time, and output characteristics

Frequently Asked Questions (FAQ)

Q: Can CX-411-P directly replace CX-411B-P-C05 in existing installations?

A: Yes. Both sensors share identical electrical specifications, sensing distance, response time, output configuration, and environmental ratings. The CX-411-P operates within the same 12V to 24V supply range and maintains the same 1ms response time and IP67 ingress protection.

Q: What is the difference between the two part numbers?

A: The primary differences are product status and packaging. CX-411B-P-C05 is obsolete with unspecified packaging, while CX-411-P is active and supplied in Box format. Both are manufactured by Panasonic Industrial Automation Sales within the CX-400 series.

Q: Are there cable length differences between these sensors?

A: CX-411B-P-C05 includes a 50cm (19.5 inch) cable. CX-411-P cable length is not specified in the available documentation. Verify cable requirements for your application before procurement.

Q: Do both sensors support the same output logic?

A: Both sensors provide PNP open collector output. CX-411B-P-C05 specifies dark-ON logic, while CX-411-P output configuration is listed as open collector without explicit dark-ON designation. Confirm output logic requirements for your control circuit.

Q: What compliance certifications apply to each part?

A: CX-411B-P-C05 carries RoHS compliance. CX-411-P carries ROHS3 compliance, representing an enhanced regulatory standard. Both are classified under ECCN EAR99 and HTSUS 8541.49.8000.