CWN-360-14-0000 Equivalent & Substitute Parts

Part Overview

The CWN-360-14-0000 is a rectangular connector header manufactured by CW Industries, designed for through-hole mounting applications. This shrouded 14-position header with 2.54mm pitch serves board-to-cable/wire interconnection requirements. The part maintains active product status with full inventory availability. Substitute parts are identified for applications requiring alternative manufacturers, compliance certifications, or specific performance characteristics while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	14
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Shrouding	Shrouded - 4 Wall
Fastening Type	Push-Pull
Contact Material	Phosphor Bronze
Contact Finish - Mating	Gold
Contact Finish - Post	Nickel
Insulation Material	Thermoplastic
Operating Temperature	-55°C ~ 125°C
Current Rating	1A
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters: 14-position count, 2-row configuration, 0.100" (2.54mm) mating pitch, 0.100" (2.54mm) row spacing, shrouded 4-wall design, through-hole mounting, solder termination, push-pull fastening, and male pin contact type. All identified substitutes maintain these electrical and mechanical specifications.

The substitute parts are grouped as follows:

3M 3000 Series (3314-6002, N3314-6002RB, N3314-6003RB): These parts share identical position count, pitch, row spacing, shrouding, and mounting characteristics. Variations exist in contact post length, insulation material composition, and current rating specifications.

Amphenol ICC Quickie™ Series (71918-014LF): This part maintains all core position, pitch, and mechanical parameters with differences in contact length specifications and insulation material formulation.

Parameter Comparison

Parameter	CWN-360-14-0000	3314-6002	71918-014LF	N3314-6002RB	N3314-6003RB
Manufacturer	CW Industries	3M	Amphenol ICC (FCI)	3M	3M
Product Status	Active	Obsolete	Active	Active	Active
Number of Positions	14	14	14	14	14
Number of Rows	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Contact Shape	Circular	Square	Square	Square	Square
Contact Material	Phosphor Bronze	Copper Alloy	Phosphor Bronze	Copper Alloy	Copper Alloy
Contact Finish - Mating	Gold	Gold	Gold, GXT™	Gold	Gold
Contact Finish - Post	Nickel	Tin-Lead	Tin	Tin	Tin
Insulation Material	Thermoplastic	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Thermoplastic, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled
Operating Temperature	-55°C ~ 125°C	-55°C ~ 105°C	Not specified	-55°C ~ 105°C	-55°C ~ 105°C
Current Rating	1A	1A	Not specified	1.75A	1.75A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Bulk	Tube	Bulk	Bulk

Engineering Selection Recommendations

CWN-360-14-0000 (Primary Selection): Active product status with ROHS3 compliance and extended operating temperature range (-55°C to 125°C). Suitable for applications requiring the highest compliance certifications and temperature performance.

N3314-6002RB and N3314-6003RB (3M 3000 Series): Active product status with RoHS compliance. These parts offer higher current rating (1.75A versus 1A) and are suitable for applications where increased current capacity is required. N3314-6003RB provides extended contact post length (0.155" versus 0.112") compared to N3314-6002RB. Operating temperature limited to -55°C to 105°C.

71918-014LF (Amphenol ICC Quickie™): Active product status with RoHS compliance and tube packaging. Suitable for high-volume applications. Operating temperature range not specified in provided data.

3314-6002 (3M 3000 Series): Obsolete product status. Not recommended for new designs or applications requiring long-term supply assurance. RoHS non-compliant. Use only for legacy system maintenance where no alternative exists.

Frequently Asked Questions (FAQ)

Q: Can CWN-360-14-0000 be directly replaced with 3314-6002?

A: Both parts share identical position count (14), row configuration (2), mating pitch (0.100"), row spacing (0.100"), shrouding (4-wall), mounting type (through-hole), termination (solder), and fastening type (push-pull). However, 3314-6002 is obsolete and RoHS non-compliant, making it unsuitable for new designs. For active product substitution, use N3314-6002RB or N3314-6003RB instead.

Q: What are the differences between N3314-6002RB and N3314-6003RB?

A: Both parts are electrically and mechanically compatible with CWN-360-14-0000. The primary difference is contact post length: N3314-6002RB provides 0.112" (2.84mm) post length, while N3314-6003RB provides 0.155" (3.94mm) post length, matching the CWN-360-14-0000 specification. Both offer 1.75A current rating and -55°C to 105°C operating temperature range.

Q: Does packaging affect substitution compatibility?

A: Packaging format (bulk versus tube) does not affect electrical or mechanical compatibility. CWN-360-14-0000 and N3314-6002RB/N3314-6003RB are supplied in bulk packaging, while 71918-014LF is supplied in tube packaging. Selection should be based on procurement and assembly process requirements.

Q: What is the operating temperature limitation when substituting with 3M parts?

A: CWN-360-14-0000 operates from -55°C to 125°C. The 3M substitute parts (3314-6002, N3314-6002RB, N3314-6003RB) operate from -55°C to 105°C. Applications requiring operation above 105°C must use CWN-360-14-0000 or 71918-014LF (operating temperature not specified).

Q: Are all substitute parts RoHS compliant?

A: CWN-360-14-0000, 71918-014LF, N3314-6002RB, and N3314-6003RB are RoHS compliant. The 3314-6002 is RoHS non-compliant and should not be used in applications requiring RoHS certification.

Q: What is the current rating difference between substitute parts?

A: CWN-360-14-0000 and 3314-6002 are rated for 1A. N3314-6002RB and N3314-6003RB are rated for 1.75A. 71918-014LF current rating is not specified in provided data. Applications requiring current capacity above 1A should use N3314-6002RB or N3314-6003RB.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message