CWA2410S Equivalent & Substitute Parts

Part Overview

The CWA2410S is a solid-state relay (SSR) manufactured by Sensata-Crydom, configured as a SPST-NO (1 Form A) device in a hockey puck package. This component is rated for 10A load current with input voltage range of 90–280VAC and load voltage range of 24–280V, featuring AC output with zero-cross switching. The CWA2410S is classified as obsolete, making identification of equivalent substitute parts essential for ongoing system maintenance and new design implementations.

Substiute Parts

CWA2410S

Sensata-CrydomIn Stock: 1086CWA2410S Datasheet

Current PartRFQ

CWA2410P

Sensata TechnologiesIn Stock: 1022CWA2410P Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CWA2410S is determined by strict equivalence across the following parameters:

• Circuit configuration: SPST-NO (1 Form A)
• Output type: AC with zero-cross switching
• Input voltage range: 90–280VAC
• Load voltage range: 24–280V
• Load current rating: 10A
• Mounting type: Chassis Mount
• Termination style: Screw Terminal
• Package type: Hockey Puck

The CWA2410P qualifies as a direct substitute based on identical electrical specifications and mechanical form factor. The primary distinction is product status: CWA2410P is active and available, whereas CWA2410S is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The CWA2410P is the direct equivalent for CWA2410S applications. Both components share identical electrical ratings, circuit topology, and mechanical specifications. The CWA2410P is the manufacturer-recommended substitute and maintains active product status with RoHS compliance certification. Selection of CWA2410P eliminates obsolescence risk while preserving full functional and mechanical compatibility with existing designs using CWA2410S.

Frequently Asked Questions (FAQ)

Q: Can CWA2410P be used as a direct replacement for CWA2410S?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters: SPST-NO circuit, 10A load current, 90–280VAC input, 24–280V load voltage, AC zero-cross output, chassis mount configuration, screw terminal termination, and hockey puck package.

Q: What is the primary reason to substitute CWA2410S with CWA2410P?

A: CWA2410S is obsolete. CWA2410P is the active equivalent from the same manufacturer series (CW24), ensuring continued availability and supply chain reliability.

Q: Are there any mechanical differences between CWA2410S and CWA2410P?

A: No. Both components use identical hockey puck packaging and chassis mount configuration with screw terminal termination.

Q: Does CWA2410P meet RoHS compliance requirements?

A: Yes. CWA2410P is RoHS Compliant. CWA2410S compliance status is not specified in available documentation.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. Identical mounting type, termination style, and package form factor ensure direct interchangeability without design modification.