Vishay Dale CW010470R0JS67 Equivalent & Substitute Parts

Part Overview

The Vishay Dale CW010470R0JS67 is a 470 Ohm, 13W axial wirewound resistor with ±5% tolerance, designed for through-hole applications requiring moisture resistance. This component is classified as Active product status. Substitute parts are identified to address packaging format availability, compliance requirements, or inventory constraints while maintaining identical electrical and mechanical specifications.

Substiute Parts

CW010470R0JS67

Vishay DaleIn Stock: 1130CW010470R0JS67 Datasheet

Current PartRFQ

CW010470R0JE73

Vishay DaleIn Stock: 2138CW010470R0JE73 Datasheet

Parametric EquivalentRFQ

CW010470R0JE73HE

Vishay DaleIn Stock: 1283CW010470R0JE73HE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CW010470R0JS67 are qualified based on matching the following critical parameters:

• Resistance value: 470 Ohms
• Power rating: 13W
• Tolerance: ±5%
• Composition: Wirewound
• Package type: Axial
• Temperature coefficient: ±30ppm/°C
• Operating temperature range: -65°C to 350°C
• Physical dimensions: 0.375" Dia × 1.781" L
• Number of terminations: 2

The primary difference between the main part and substitutes is packaging format (Tape & Reel versus Cut Tape) and compliance certifications. All substitute parts maintain identical electrical performance and mechanical fit.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers are Active status components from Vishay Dale and are electrically and mechanically interchangeable for circuit applications requiring 470 Ohm, 13W axial wirewound resistors.

CW010470R0JE73 and CW010470R0JE73HE are ROHS3 compliant and REACH unaffected, making them suitable for applications subject to environmental regulations. The CW010470R0JS67 is RoHS non-compliant and REACH affected, requiring evaluation against specific regulatory requirements.

Selection between CW010470R0JE73 and CW010470R0JE73HE depends on moisture resistance requirements. CW010470R0JE73 explicitly specifies moisture resistant features, while CW010470R0JE73HE does not document this feature.

Packaging format selection (Tape & Reel versus Cut Tape) is determined by assembly process requirements and inventory management practices.

Frequently Asked Questions (FAQ)

Q: Can CW010470R0JE73 or CW010470R0JE73HE be used as direct replacements for CW010470R0JS67?

A: Yes. All three parts share identical electrical specifications (470 Ohms, 13W, ±5% tolerance, ±30ppm/°C temperature coefficient, -65°C to 350°C operating range) and mechanical dimensions (0.375" Dia × 1.781" L axial package). Substitution is valid from an electrical and mechanical standpoint.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on reels, suitable for automated assembly equipment. Cut Tape (CT) packaging provides components on cut sections of carrier tape, typically for manual assembly or lower-volume applications. Both formats contain identical components.

Q: Are there compliance differences between these parts?

A: Yes. CW010470R0JE73 and CW010470R0JE73HE are ROHS3 compliant and REACH unaffected. CW010470R0JS67 is RoHS non-compliant and REACH affected. Selection must align with applicable regulatory requirements for the end application.

Q: Does moisture resistance affect substitution eligibility?

A: CW010470R0JE73 explicitly includes moisture resistant features. CW010470R0JE73HE does not document this feature. For applications requiring moisture resistance, CW010470R0JE73 is the appropriate selection.

Q: Are all parts currently in stock?

A: Inventory status at time of reference: CW010470R0JS67 (1106 pcs), CW010470R0JE73 (2040 pcs), CW010470R0JE73HE (1205 pcs). Verify current availability with supplier.