CW01010K00JS67 Equivalent & Substitute Parts

Part Overview

The CW01010K00JS67 is a 10 kOhms ±5% 13W axial wirewound resistor manufactured by Vishay Dale. This through-hole component features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently active in production. Substitute parts are identified when packaging format differs or when compliance requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CW01010K00JS67

Vishay DaleIn Stock: 1155CW01010K00JS67 Datasheet

Current PartRFQ

CW01010K00JE12

Vishay DaleIn Stock: 1201CW01010K00JE12 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CW01010K00JS67 is determined by matching the following critical parameters:

• Resistance value: 10 kOhms
• Tolerance: ±5%
• Power rating: 13W
• Composition: Wirewound
• Package type: Axial
• Temperature coefficient: ±30ppm/°C
• Operating temperature range: -65°C to 350°C
• Physical dimensions: 0.375" Dia x 1.781" L
• Moisture-resistant feature
• Number of terminations: 2

The CW01010K00JE12 qualifies as a direct substitute based on identical electrical specifications and mechanical dimensions. The primary difference is packaging format: the main part is supplied in Tape & Reel format, while the substitute is supplied in Bulk packaging. Both parts are manufactured by Vishay Dale within the CW series.

Parameter Comparison

Engineering Selection Recommendations

Both the CW01010K00JS67 and CW01010K00JE12 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on packaging requirements and compliance status.

The CW01010K00JS67 is supplied in Tape & Reel format and is RoHS non-compliant. The CW01010K00JE12 is supplied in Bulk packaging and is RoHS3 compliant. For applications requiring RoHS3 compliance, the CW01010K00JE12 is the appropriate selection. For applications with Tape & Reel packaging requirements, the CW01010K00JS67 remains the primary choice.

Both parts carry identical ECCN (EAR99) and HTSUS (8533.21.0080) classifications. REACH status differs: CW01010K00JS67 is REACH Affected, while CW01010K00JE12 is REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can CW01010K00JE12 replace CW01010K00JS67 in circuit applications?

A: Yes. Both parts have identical resistance, tolerance, power rating, temperature coefficient, operating temperature range, and physical dimensions. Substitution is electrically and mechanically valid.

Q: What is the primary difference between these two parts?

A: The main difference is packaging format. CW01010K00JS67 is supplied in Tape & Reel format, while CW01010K00JE12 is supplied in Bulk packaging. Additionally, CW01010K00JE12 is RoHS3 compliant, whereas CW01010K00JS67 is RoHS non-compliant.

Q: Does packaging format affect circuit performance?

A: No. Packaging format is a supply and handling consideration only. It does not affect electrical performance or mechanical fit in the circuit.

Q: Which part should I select for RoHS3 compliant applications?

A: Select CW01010K00JE12, which is RoHS3 compliant. CW01010K00JS67 is RoHS non-compliant.

Q: Are there any differences in REACH compliance between these parts?

A: Yes. CW01010K00JS67 is REACH Affected, while CW01010K00JE12 is REACH Unaffected. For applications subject to REACH regulations, verify compliance requirements with your supply chain.

Q: Can I use CW01010K00JE12 if my assembly line requires Tape & Reel packaging?

A: No. CW01010K00JE12 is supplied only in Bulk packaging. If Tape & Reel format is required for automated assembly, CW01010K00JS67 is the appropriate selection.