CW010100R0JS67 Equivalent & Substitute Parts

Part Overview

The CW010100R0JS67 is a 100 Ohm, 13W wirewound axial resistor manufactured by Vishay Dale. This through-hole component features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently active in production with 843 units available in Tape & Reel packaging. Substitute parts may be required due to packaging format availability, compliance requirements, or inventory constraints in specific distribution channels.

Substiute Parts

CW010100R0JS67

Vishay DaleIn Stock: 917CW010100R0JS67 Datasheet

Current PartRFQ

CW010100R0JE73

Vishay DaleIn Stock: 1718CW010100R0JE73 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The CW010100R0JE73 qualifies as a parametric equivalent to the CW010100R0JS67 based on the following criteria:

Electrical parameters are identical: 100 Ohm resistance, ±5% tolerance, 13W power rating, ±30ppm/°C temperature coefficient, and -65°C to 350°C operating temperature range.

Mechanical parameters are identical: Axial package configuration, 0.375" Dia x 1.781" L physical dimensions, and 2 terminations.

Material composition and features are identical: Wirewound construction with moisture-resistant properties.

The primary difference is packaging format: CW010100R0JS67 is supplied in Tape & Reel (TR) configuration, while CW010100R0JE73 is supplied in Cut Tape (CT) configuration. Both packaging formats are standard distribution methods for through-hole components and do not affect electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both CW010100R0JS67 and CW010100R0JE73 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on the following factors:

Packaging format requirements: CW010100R0JS67 is supplied in Tape & Reel format, suitable for automated assembly processes. CW010100R0JE73 is supplied in Cut Tape format, suitable for manual assembly or lower-volume applications.

Compliance requirements: CW010100R0JE73 carries ROHS3 compliance and REACH Unaffected status, making it suitable for applications with strict environmental regulations. CW010100R0JS67 is RoHS non-compliant and REACH Affected, requiring evaluation against specific application requirements.

Inventory availability: CW010100R0JE73 has higher inventory availability (1615 units) compared to CW010100R0JS67 (843 units).

Both parts are suitable for high-temperature applications up to 350°C and maintain stable performance across the full operating range with identical temperature coefficients.

Frequently Asked Questions (FAQ)

Q: Can CW010100R0JE73 be used as a direct replacement for CW010100R0JS67?

A: Yes. Both parts have identical electrical parameters (100 Ohm, ±5%, 13W), identical mechanical dimensions (0.375" Dia x 1.781" L), and identical operating characteristics (±30ppm/°C, -65°C to 350°C). The only difference is packaging format (Cut Tape vs. Tape & Reel).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape packaging supplies components on individual tape segments, typically used for manual assembly or lower-volume production runs. Both formats contain the same component with identical performance.

Q: Does the packaging format affect electrical performance?

A: No. Packaging format is a distribution and handling method only. It does not affect the electrical characteristics, tolerance, power rating, or temperature performance of the resistor.

Q: What are the compliance differences between these parts?

A: CW010100R0JE73 is ROHS3 compliant and REACH Unaffected. CW010100R0JS67 is RoHS non-compliant and REACH Affected. Applications subject to environmental regulations should use CW010100R0JE73.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts operate from -65°C to 350°C with a temperature coefficient of ±30ppm/°C, making them suitable for high-temperature circuit applications.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly process is compatible with the packaging format. Tape & Reel format requires automated assembly equipment, while Cut Tape format is compatible with both manual and automated assembly processes.