CW00110R00JS70 Equivalent & Substitute Parts

Part Overview

The CW00110R00JS70 is a 10 Ohms ±5% through-hole resistor manufactured by Vishay Dale in the CW series. This axial wirewound resistor features moisture-resistant construction and operates across a wide temperature range from -65°C to 350°C. The part is currently active in production and available in Tape & Reel packaging. Substitute parts are necessary when Tape & Reel packaging is unavailable or when RoHS3 compliance is required for specific applications.

Substiute Parts

CW00110R00JS70

Vishay DaleIn Stock: 1130CW00110R00JS70 Datasheet

Current PartRFQ

CW00110R00JE70

Vishay DaleIn Stock: 2513CW00110R00JE70 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CW00110R00JS70 is determined by the following critical parameters:

• Resistance value: 10 Ohms
• Tolerance: ±5%
• Composition: Wirewound
• Features: Moisture Resistant
• Temperature Coefficient: ±30ppm/°C
• Operating Temperature Range: -65°C ~ 350°C
• Package Type: Axial
• Physical Dimensions: 0.094" Dia x 0.406" L (2.39mm x 10.31mm)
• Number of Terminations: 2

The CW00110R00JE70 qualifies as a direct substitute because it maintains identical electrical specifications and physical dimensions. The primary difference is packaging format: CW00110R00JS70 is supplied in Tape & Reel format, while CW00110R00JE70 is supplied in Cut Tape format. Both parts are manufactured by Vishay Dale within the same CW series and share all critical electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both CW00110R00JS70 and CW00110R00JE70 are active production parts from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts depends on two factors:

Packaging Requirements: The CW00110R00JS70 is supplied in Tape & Reel format suitable for automated assembly processes. The CW00110R00JE70 is supplied in Cut Tape format, appropriate for manual assembly or lower-volume applications.

Regulatory Compliance: The CW00110R00JE70 carries ROHS3 compliance certification, making it the required choice for applications subject to RoHS3 regulations. The CW00110R00JS70 is RoHS non-compliant and should not be used in applications where RoHS3 compliance is mandatory.

Frequently Asked Questions (FAQ)

Q: Can CW00110R00JE70 be used as a direct replacement for CW00110R00JS70?

A: Yes. Both parts are electrically and mechanically identical. The CW00110R00JE70 differs only in packaging format (Cut Tape versus Tape & Reel) and RoHS compliance status. Substitution is valid provided the application does not require Tape & Reel packaging specifically.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous tape wound on a reel, designed for high-speed automated pick-and-place assembly. Cut Tape packaging supplies components on tape segments, suitable for manual assembly or lower-volume production runs.

Q: Does RoHS3 compliance affect electrical performance?

A: No. RoHS3 compliance is a regulatory certification regarding material composition and hazardous substance restrictions. It does not alter the electrical or thermal characteristics of the resistor.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both CW00110R00JS70 and CW00110R00JE70 measure 0.094" diameter by 0.406" length (2.39mm x 10.31mm). They are mechanically interchangeable in circuit board layouts.

Q: Which part should be selected for new designs?

A: For new designs subject to RoHS3 regulations, select CW00110R00JE70. For applications without RoHS3 requirements, either part is acceptable based on packaging needs.