CTAPR500-2/0-6 Equivalent & Substitute Parts

Part Overview

The CTAPR500-2/0-6 is a C-style copper compression connector terminal manufactured by Panduit Corp, designed for crimpband open band termination applications. This component accommodates wire gauges from 300-500 MCM (kcmil) and 2/0-6 AWG, providing non-insulated termination for high-amperage electrical connections.

The CTAPR500-2/0-6 is currently discontinued at DiGi Electronics. Identifying equivalent substitute parts ensures continuity of supply for maintenance, repair, and new installation projects requiring compatible crimpband open band connectors within the specified wire gauge range.

Substiute Parts

CTAPR500-2/0-6

Panduit CorpIn Stock: 1092CTAPR500-2/0-6 Datasheet

Current PartRFQ

CTAPR500-2/0-X

Panduit CorpIn Stock: 877CTAPR500-2/0-X Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CTAPR500-2/0-6 is determined by the following critical parameters:

Wire Gauge Compatibility: The substitute part must accommodate the same wire gauge range (300-500 MCM / 2/0-6 AWG) to ensure proper crimp contact and electrical performance.

Terminal Type: The substitute must maintain the crimpband open band configuration to ensure mechanical and electrical compatibility with existing crimping equipment and installation procedures.

Termination Method: Crimp termination is required for consistency with the original component's design and application requirements.

Insulation Status: Non-insulated construction must be preserved to maintain the electrical and thermal characteristics of the original terminal.

Manufacturer Consistency: Panduit Corp manufacture ensures design compatibility and performance standards within the CTAPR series.

The CTAPR500-2/0-X substitute part meets all these criteria while offering active product status, ensuring ongoing availability and support.

Parameter Comparison

Engineering Selection Recommendations

The CTAPR500-2/0-X is the designated manufacturer-recommended substitute for the discontinued CTAPR500-2/0-6. Both components share identical terminal type, termination method, insulation characteristics, and compliance certifications (ROHS3, MSL 1).

The CTAPR500-2/0-X maintains active product status, ensuring reliable supply chain availability and manufacturer support. The wire gauge specification for the substitute (300-500 MCM / kcmil) aligns with the primary application range of the original part.

Selection of the CTAPR500-2/0-X is appropriate for applications requiring crimpband open band connectors within the specified wire gauge parameters, with the added benefit of confirmed ongoing availability.

Frequently Asked Questions (FAQ)

Q: Can the CTAPR500-2/0-X be used as a direct replacement for the CTAPR500-2/0-6?

A: Yes. Both components share identical terminal type (crimpband, open band), termination method (crimp), insulation status (non-insulated), and compliance certifications. The wire gauge range specifications are compatible for the intended application.

Q: What is the primary reason for substitution?

A: The CTAPR500-2/0-6 is discontinued at DiGi Electronics. The CTAPR500-2/0-X is the manufacturer-recommended active alternative that maintains all critical electrical and mechanical parameters.

Q: Are there any differences in packaging or inventory considerations?

A: Both components are supplied in bulk packaging. The CTAPR500-2/0-X currently has 824 pieces in stock, compared to 988 pieces available for the discontinued CTAPR500-2/0-6.

Q: Does the substitute part maintain RoHS compliance?

A: Yes. The CTAPR500-2/0-X is ROHS3 compliant, matching the compliance status of the original component.

Q: What wire gauge applications are supported by the substitute?

A: The CTAPR500-2/0-X accommodates 300-500 MCM (kcmil) wire gauges, covering the primary application range of the original CTAPR500-2/0-6.

Q: Is the moisture sensitivity level the same for both parts?

A: Yes. Both the CTAPR500-2/0-6 and CTAPR500-2/0-X have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.