CTAPR250-2/0-6 Equivalent & Substitute Parts

Part Overview

The CTAPR250-2/0-6 is a C-style copper compression connector terminal manufactured by Panduit Corp, designed for crimpband open band termination applications. This component accommodates wire gauges ranging from 250MCM (kcmil) to 3/0 AWG and 2/0-6 AWG configurations. The part is classified as discontinued at DiGi Electronics, necessitating identification of active equivalent alternatives to maintain supply chain continuity for ongoing applications and new installations.

Substiute Parts

CTAPR250-2/0-6

Panduit CorpIn Stock: 810CTAPR250-2/0-6 Datasheet

Current PartRFQ

CTAPR250-2/0-L

Panduit CorpIn Stock: 1110CTAPR250-2/0-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CTAPR250-2/0-6 is determined by the following critical parameters:

Primary Substitution Criteria:

• Manufacturer: Panduit Corp (same manufacturer ensures design consistency)
• Series: CTAPR (maintains product line compatibility)
• Terminal Type: Crimpband, Open Band (identical termination interface)
• Termination Method: Crimp (same connection technology)
• Wire Gauge Compatibility: 250MCM (kcmil)-3/0 AWG (primary range match)
• Insulation Type: Non-Insulated (identical electrical configuration)
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected (maintains environmental standards)

The CTAPR250-2/0-L qualifies as a direct substitute based on matching all primary substitution criteria. The key distinction is product status: CTAPR250-2/0-L is active and maintains full availability, whereas CTAPR250-2/0-6 is discontinued.

Parameter Comparison

Engineering Selection Recommendations

CTAPR250-2/0-L is the appropriate substitute for CTAPR250-2/0-6 based on the following engineering factors:

Product Status: CTAPR250-2/0-L maintains active status with confirmed inventory availability (1010 pcs), whereas CTAPR250-2/0-6 is discontinued. Active status ensures continued supply chain access and manufacturer support.

Regulatory Compliance: Both parts maintain identical ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for new installations and replacements.

Functional Equivalence: The substitute part maintains identical terminal type, termination method, primary wire gauge range (250MCM to 3/0 AWG), and insulation configuration. These parameters ensure direct functional compatibility in applications designed for the original part.

Packaging Consideration: CTAPR250-2/0-L is supplied in bulk packaging, which may require adjustment to procurement and inventory management procedures compared to the original part's unspecified packaging format.

Frequently Asked Questions (FAQ)

Q: Can CTAPR250-2/0-L be used as a direct replacement for CTAPR250-2/0-6?

A: Yes. Both parts share identical terminal type, termination method, primary wire gauge range (250MCM-3/0 AWG), insulation type, and regulatory compliance status. The substitute is functionally equivalent for applications within the 250MCM to 3/0 AWG wire gauge specification.

Q: What is the difference between CTAPR250-2/0-6 and CTAPR250-2/0-L?

A: The primary difference is product status. CTAPR250-2/0-6 is discontinued at DiGi Electronics, while CTAPR250-2/0-L is active with available inventory. The original part specifies wire gauge compatibility for both 250MCM-3/0 AWG and 2/0-6 AWG, whereas the substitute specifies 250MCM-3/0 AWG. Packaging differs: the substitute is supplied in bulk format.

Q: Are there wire gauge limitations when substituting to CTAPR250-2/0-L?

A: The substitute part is specified for 250MCM (kcmil)-3/0 AWG wire gauge range. Applications requiring the 2/0-6 AWG configuration specified in the original part should confirm compatibility with the substitute's primary wire gauge specification.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both CTAPR250-2/0-6 and CTAPR250-2/0-L are ROHS3 compliant and REACH unaffected, satisfying identical environmental and regulatory requirements.

Q: What packaging format is used for the substitute part?

A: CTAPR250-2/0-L is supplied in bulk packaging. Organizations accustomed to alternative packaging formats for the original part should adjust procurement and inventory management procedures accordingly.