CT2944-50 Equivalent & Substitute Parts

Part Overview

The CT2944-50 is a BNC coaxial connector terminator adapter designed for 50-ohm RF applications. This component functions as a jack-to-plug adapter terminator, providing impedance matching in coaxial transmission systems. The CT2944-50 is classified as obsolete, making identification of compatible substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

CT2944-50

Cal Test ElectronicsIn Stock: 1210CT2944-50 Datasheet

Current PartRFQ

CT2944C-50

Cal Test ElectronicsIn Stock: 1236CT2944C-50 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CT2944-50 is determined by the following critical parameters:

• Connector Style & Type: BNC jack-to-plug adapter configuration
• Impedance: 50 ohms (mandatory for RF signal integrity)
• Mounting Configuration: Free hanging (in-line) form factor
• Material Composition: Brass body with nickel finish, beryllium copper contacts with gold finish
• Dielectric Material: PTFE insulation
• Compliance Standards: ROHS3 compliance and REACH unaffected status

The CT2944C-50 qualifies as a substitute based on matching all core electrical and mechanical parameters. The primary distinction is product status (active vs. obsolete) and maximum frequency rating.

Parameter Comparison

Engineering Selection Recommendations

The CT2944C-50 is the designated substitute for the obsolete CT2944-50. Both components maintain identical mechanical form factors, electrical impedance specifications, and material compositions. The CT2944C-50 carries active product status with current manufacturing support and inventory availability (1136 pcs in stock).

Selection of the CT2944C-50 is supported by:

• Matching 50-ohm impedance for RF circuit compatibility
• Identical BNC jack-to-plug adapter configuration
• Equivalent material specifications (brass body, beryllium copper contacts, gold finish, PTFE dielectric)
• ROHS3 compliance certification on both parts
• Active product status ensuring continued availability and supply chain reliability

The frequency rating difference (2 GHz vs. 1 GHz maximum) should be evaluated against specific application requirements. Applications operating below 1 GHz encounter no operational constraints with the substitute part.

Frequently Asked Questions (FAQ)

Q: Can CT2944C-50 be used as a direct replacement for CT2944-50?

A: Yes. Both parts share identical connector style, impedance, mounting configuration, and material specifications. The CT2944C-50 is the active production equivalent.

Q: What is the significance of the frequency rating difference?

A: The CT2944-50 supports operation to 2 GHz, while the CT2944C-50 supports operation to 1 GHz. For applications operating at frequencies below 1 GHz, this difference has no impact on performance. Applications requiring operation above 1 GHz must retain the original CT2944-50 specification or identify alternative components rated for higher frequencies.

Q: Are there packaging differences between these parts?

A: The CT2944-50 packaging is unspecified in available documentation. The CT2944C-50 is supplied in bulk packaging. Packaging format should be confirmed with the supplier based on procurement requirements.

Q: Do both parts meet current compliance standards?

A: Yes. Both CT2944-50 and CT2944C-50 are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component procurement.

Q: Why is the CT2944-50 classified as obsolete?

A: Obsolete status indicates the part is no longer in active production. The CT2944C-50 represents the current production alternative from the same manufacturer with equivalent specifications.