CSTLS10M0G53-A0 Equivalent & Substitute Parts

Part Overview

The CSTLS10M0G53-A0 is a 10 MHz ceramic resonator with built-in 15 pF capacitor manufactured by Murata Electronics. This through-hole component operates across -20°C to 80°C with ±0.2% frequency stability and 25 Ohms impedance. The part carries a "Not For New Designs" status, making identification of functionally equivalent alternatives essential for ongoing production support and legacy system maintenance.

Substiute Parts

CSTLS10M0G53-A0

Murata ElectronicsIn Stock: 3501CSTLS10M0G53-A0 Datasheet

Current PartRFQ

CSTLS10M0G53-B0

Murata ElectronicsIn Stock: 1822CSTLS10M0G53-B0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CSTLS10M0G53-A0 is determined by strict equivalence across the following parameters:

• Frequency: 10 MHz (exact match required)
• Frequency Stability: ±0.2% (exact match required)
• Frequency Tolerance: ±0.5% (exact match required)
• Built-in Capacitance: 15 pF (exact match required)
• Impedance: 25 Ohms (exact match required)
• Operating Temperature Range: -20°C to 80°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial - 3 Lead, 2.50mm Pitch (exact match required)
• Physical Dimensions: 8.00mm × 3.00mm × 6.00mm (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The CSTLS10M0G53-B0 meets all substitution criteria as a direct electrical and mechanical equivalent. The only difference between the main part and substitute is packaging format (Cut Tape versus Bulk).

Parameter Comparison

Engineering Selection Recommendations

The CSTLS10M0G53-B0 is a direct functional equivalent to the CSTLS10M0G53-A0. Both parts are manufactured by Murata Electronics within the CERALOCK® CSTLS series and maintain identical electrical specifications and mechanical form factors. Both parts carry "Not For New Designs" status and ROHS3 compliance certification.

Selection between these parts should be based on packaging requirements and inventory availability. The CSTLS10M0G53-A0 is supplied in Cut Tape format with 3400 units in stock. The CSTLS10M0G53-B0 is supplied in Bulk format with 1800 units in stock. For applications requiring specific packaging formats or tape-and-reel handling, the appropriate part number should be selected accordingly.

Frequently Asked Questions (FAQ)

Q: Can CSTLS10M0G53-B0 be used as a direct replacement for CSTLS10M0G53-A0?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Cut Tape versus Bulk. Functional performance in the circuit is equivalent.

Q: What determines substitution eligibility for this ceramic resonator?

A: Substitution requires exact matching across frequency (10 MHz), frequency stability (±0.2%), frequency tolerance (±0.5%), built-in capacitance (15 pF), impedance (25 Ohms), operating temperature range (-20°C to 80°C), mounting type (Through Hole), package configuration (Radial - 3 Lead, 2.50mm Pitch), and physical dimensions (8.00mm × 3.00mm × 6.00mm).

Q: Why is the product status listed as "Not For New Designs"?

A: This designation indicates the part is in mature or end-of-life phase. Existing designs may continue to use this component, but new product development should evaluate current alternatives from the manufacturer's active product portfolio.

Q: Are both parts RoHS compliant?

A: Yes. Both CSTLS10M0G53-A0 and CSTLS10M0G53-B0 are ROHS3 compliant and REACH affected.

Q: What is the difference between Cut Tape and Bulk packaging?

A: Cut Tape (CT) packaging supplies components on tape that has been cut to specific lengths, typically for automated pick-and-place assembly. Bulk packaging supplies loose components. Selection depends on assembly process requirements and handling procedures.