CSS2728JT10L0 Equivalent & Substitute Parts

Part Overview

The CSS2728JT10L0 is a 10 milliohm, ±5% tolerance, 3-watt chip resistor manufactured by Stackpole Electronics Inc. This current sense metal element resistor is designed for automotive applications and meets AEC-Q200 qualification standards. The part is housed in a Wide 2827 (7067 Metric) package with 2728 configuration, featuring a temperature coefficient of ±15ppm/°C and an operating temperature range of -55°C to 225°C. The CSS2728JT10L0 is currently active in production with 996 pieces available in stock. Substitute parts are identified when design requirements necessitate improved tolerance specifications or increased power dissipation capability while maintaining electrical and mechanical compatibility.

Substiute Parts

CSS2728JT10L0

Stackpole Electronics IncIn Stock: 1059CSS2728JT10L0 Datasheet

Current PartRFQ

CSSH2728FT10L0

Stackpole Electronics IncIn Stock: 5700CSSH2728FT10L0 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CSS2728JT10L0 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 10 mOhms
• Temperature coefficient: ±15ppm/°C
• Operating temperature range: -55°C to 225°C
• Composition: Metal Element

Mechanical Parameters (Must Match):

• Package / Case: Wide 2827 (7067 Metric), 2728
• Physical dimensions: 0.264" L x 0.283" W (6.71mm x 7.19mm)
• Height - Seated (Max): 0.049" (1.24mm)
• Number of terminations: 2

Allowable Variations:

• Tolerance: May be improved (tighter) than ±5%
• Power rating: May be increased above 3W
• Series designation: May differ (CSS vs. CSSH)

Compliance Requirements (Must Match):

• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Moisture Sensitivity Level 1

Parameter Comparison

Engineering Selection Recommendations

The CSSH2728FT10L0 is a direct substitute for the CSS2728JT10L0 in applications where improved tolerance and increased power dissipation are beneficial. Both parts maintain identical mechanical compatibility, identical operating temperature ranges, and identical AEC-Q200 automotive qualification. The substitute part offers ±1% tolerance compared to ±5%, and a 4W power rating compared to 3W, while maintaining the same physical footprint and electrical characteristics. Both parts are ROHS3 compliant and carry Moisture Sensitivity Level 1 rating. Selection between these parts depends on circuit design requirements for tolerance precision and thermal dissipation capacity.

Frequently Asked Questions (FAQ)

Q: Can CSSH2728FT10L0 be used as a direct replacement for CSS2728JT10L0?

A: Yes. Both parts share identical resistance values, package dimensions, operating temperature ranges, and AEC-Q200 automotive qualification. The substitute part is mechanically and electrically compatible for direct board-level substitution.

Q: What are the key differences between these parts?

A: The CSSH2728FT10L0 provides improved tolerance (±1% versus ±5%) and higher power rating (4W versus 3W). All other electrical and mechanical specifications remain identical.

Q: Are both parts suitable for automotive applications?

A: Yes. Both CSS2728JT10L0 and CSSH2728FT10L0 carry AEC-Q200 qualification and are rated for automotive use across the -55°C to 225°C operating temperature range.

Q: Do these parts require different PCB footprints?

A: No. Both parts use the Wide 2827 (7067 Metric) package with identical physical dimensions of 0.264" L x 0.283" W and maximum seated height of 0.049". They share the same PCB footprint.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, carry Moisture Sensitivity Level 1 (Unlimited), and are REACH unaffected. Compliance status is identical.

Q: Which part should be selected for high-precision current sensing applications?

A: The CSSH2728FT10L0 with ±1% tolerance is suitable for applications requiring tighter resistance tolerance control compared to the ±5% tolerance of the CSS2728JT10L0.