CSRN2010JTR360 Equivalent & Substitute Parts

Part Overview

The CSRN2010JTR360 is a 360 mOhms ±5% 1W chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This current sense thick film resistor operates across -55°C to 155°C and is ROHS3 compliant. The part is active in production with 862 units in stock. Substitute parts are identified to provide alternatives with improved tolerance specifications while maintaining identical electrical and mechanical characteristics.

Substiute Parts

CSRN2010JTR360

Stackpole Electronics IncIn Stock: 908CSRN2010JTR360 Datasheet

Current PartRFQ

CSRN2010FTR360

Stackpole Electronics IncIn Stock: 9030CSRN2010FTR360 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CSRN2010JTR360 is determined by the following criteria:

Allowed Substitution Parameters:

• Resistance value: 360 mOhms (exact match required)
• Power rating: 1W (exact match required)
• Package: 2010 (5025 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Features: Current Sense (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• Temperature coefficient: ±250ppm/°C (exact match required)

Variable Parameter:

• Tolerance: May be improved from ±5% to ±1% without affecting substitutability

The CSRN2010FTR360 qualifies as a direct substitute because it maintains all critical electrical and mechanical specifications while offering tighter tolerance control.

Parameter Comparison

Engineering Selection Recommendations

Both CSRN2010JTR360 and CSRN2010FTR360 are active production parts manufactured by Stackpole Electronics Inc with ROHS3 compliance and unlimited moisture sensitivity rating. The CSRN2010FTR360 provides improved tolerance specification (±1% versus ±5%) while maintaining identical electrical performance, thermal characteristics, and mechanical compatibility. Selection between these parts depends on circuit tolerance requirements and application specifications.

Frequently Asked Questions (FAQ)

Q: Can CSRN2010FTR360 replace CSRN2010JTR360 in existing designs?

A: Yes. The CSRN2010FTR360 is electrically and mechanically compatible. It maintains the same 360 mOhms resistance, 1W power rating, 2010 package dimensions, and operating temperature range. The improved ±1% tolerance provides tighter resistance control.

Q: What is the primary difference between these parts?

A: The tolerance specification differs. CSRN2010JTR360 has ±5% tolerance while CSRN2010FTR360 has ±1% tolerance. All other electrical and mechanical parameters are identical.

Q: Are both parts suitable for current sense applications?

A: Yes. Both parts are specified as current sense thick film resistors with identical temperature coefficients and operating ranges.

Q: Do package dimensions differ between these parts?

A: No. Both parts use the 2010 (5025 Metric) package with identical dimensions of 0.197" L x 0.097" W and maximum seated height of 0.030".

Q: Are there any compliance differences?

A: No. Both parts are ROHS3 compliant with MSL rating of 1 (Unlimited) and REACH unaffected status.