CSRF2010JT6L00 Equivalent & Substitute Parts

Part Overview

The CSRF2010JT6L00 is a 6 mOhms ±5% 1W chip resistor manufactured by Stackpole Electronics Inc in the 2010 (5025 Metric) package. This metal foil current sense resistor is designed for precision current measurement applications requiring moisture resistance and stable performance across industrial temperature ranges. The part is Active status and ROHS3 compliant. Substitute parts may be required due to inventory constraints, design optimization for tighter tolerance requirements, or application-specific performance needs.

Substiute Parts

CSRF2010JT6L00

Stackpole Electronics IncIn Stock: 987CSRF2010JT6L00 Datasheet

Current PartRFQ

CSRF2010FT6L00

Stackpole Electronics IncIn Stock: 5121CSRF2010FT6L00 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The CSRF2010FT6L00 qualifies as a direct substitute based on the following criteria:

Matching Parameters:

• Resistance value: 6 mOhms (identical)
• Power rating: 1W (identical)
• Package / Case: 2010 (5025 Metric) (identical)
• Composition: Metal Foil (identical)
• Temperature Coefficient: ±100ppm/°C (identical)
• Operating Temperature Range: -55°C ~ 125°C (identical)
• Features: Current Sense, Moisture Resistant (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)

Differentiating Parameter:

• Tolerance: ±1% (upgraded from ±5%)

The CSRF2010FT6L00 represents an upgrade path where tighter tolerance specifications are required while maintaining all other electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both CSRF2010JT6L00 and CSRF2010FT6L00 are Active status components from Stackpole Electronics Inc with identical ROHS3 compliance and REACH unaffected certifications. Selection between these parts depends on tolerance requirements:

• CSRF2010JT6L00 is suitable for applications where ±5% tolerance meets circuit specifications and cost optimization is prioritized.
• CSRF2010FT6L00 is suitable for applications requiring tighter tolerance control at ±1%, providing improved accuracy in current sensing measurements while maintaining identical thermal and environmental performance characteristics.

Both parts are packaged identically in 2010 (5025 Metric) format with identical physical dimensions and termination configuration, ensuring direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can CSRF2010FT6L00 replace CSRF2010JT6L00 in existing designs?

A: Yes. The CSRF2010FT6L00 is electrically and mechanically compatible. It maintains identical resistance value, power rating, package dimensions, and operating temperature range. The only difference is improved tolerance specification (±1% versus ±5%), which represents a performance upgrade.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs. CSRF2010JT6L00 has ±5% tolerance while CSRF2010FT6L00 has ±1% tolerance. All other parameters including resistance value, power rating, package type, and environmental specifications are identical.

Q: Are both parts suitable for current sense applications?

A: Yes. Both CSRF2010JT6L00 and CSRF2010FT6L00 are specified as current sense resistors with metal foil composition and moisture resistance features, designed for precision current measurement in industrial temperature environments.

Q: Do these parts have identical package dimensions?

A: Yes. Both parts use the 2010 (5025 Metric) package with identical dimensions of 0.197" L x 0.098" W (5.00mm x 2.50mm) and maximum seated height of 0.037" (0.95mm), ensuring direct PCB footprint compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both CSRF2010JT6L00 and CSRF2010FT6L00 are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH unaffected status.