CSR1206FTR360 Equivalent & Substitute Parts

Part Overview

The CSR1206FTR360 is a 360 mOhms ±1% 0.5W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This current sense resistor is designed for precision low-resistance applications requiring tight tolerance and stable performance across industrial temperature ranges. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when original inventory is unavailable or when design requirements necessitate alternative sourcing from qualified manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

CSR1206FTR360

Stackpole Electronics IncIn Stock: 1132CSR1206FTR360 Datasheet

Current PartRFQ

RCWE1206R360FKEA

Vishay DaleIn Stock: 25102RCWE1206R360FKEA Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CSR1206FTR360 is determined by strict equivalence across the following critical parameters:

• Resistance value: 360 mOhms
• Tolerance: ±1%
• Power rating: 0.5W (1/2W)
• Package type: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

The RCWE1206R360FKEA from Vishay Dale meets all these parameters and qualifies as a direct substitute. Physical dimensions show minor variations within acceptable tolerances for 1206 package specifications. The substitute part includes additional automotive AEC-Q200 qualification and moisture-resistant features, which do not conflict with the original part's specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the CSR1206FTR360 and RCWE1206R360FKEA are active production parts with ROHS3 compliance and identical electrical specifications. Selection between these parts should be based on:

• Availability and lead time requirements
• Packaging format preference (Tape & Reel versus Cut Tape & Digi-Reel)
• Automotive qualification requirement (RCWE1206R360FKEA includes AEC-Q200 certification)
• Supply chain and procurement agreements

The minor dimensional variations (0.002" length, 0.002" width, 0.002" height) fall within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Frequently Asked Questions (FAQ)

Q: Can RCWE1206R360FKEA be used as a direct replacement for CSR1206FTR360?

A: Yes. Both parts share identical electrical specifications (360 mOhms ±1%, 0.5W, ±100ppm/°C, -55°C to 155°C operating range) and are packaged in 1206 (3216 Metric) format with 2 terminations. Physical dimensions are within standard package tolerances.

Q: What is the difference between the two parts?

A: The RCWE1206R360FKEA includes automotive AEC-Q200 qualification and moisture-resistant features. Packaging differs: CSR1206FTR360 is supplied in Tape & Reel format, while RCWE1206R360FKEA is available in Cut Tape & Digi-Reel format.

Q: Are there any PCB layout considerations when switching between these parts?

A: No. Both parts conform to 1206 package specifications. The dimensional variations (maximum 0.002" per axis) are within standard tolerances and do not require PCB redesign.

Q: Do both parts meet RoHS requirements?

A: Yes. Both CSR1206FTR360 and RCWE1206R360FKEA are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which part should be selected for automotive applications?

A: RCWE1206R360FKEA is qualified to AEC-Q200 automotive standards. CSR1206FTR360 does not carry automotive certification.